RQT67447MaintenanceLensLens careClean the lens regularly to prevent malfunctions.Use a blower to remove dust and a cotton swabif it is extremely dirty.Recommended product:Lens cleaner kit (SZZP1038C).If the surfaces are dirtyTo clean this unit, wipe with a soft, dry cloth.If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-water solution or a weak detergent solution.• Never use alcohol, paint thinner or benzine to clean this unit.• Before using chemically treated cloth, read the instructions that camewith the cloth carefully.Tape head careClean the heads regularly to assure good quality playback and record-ing.Use a cleaning tape (not included).(For United Kingdom)(“EB” area code model only)For your safety, please read the following text carefully.This appliance is supplied with a moulded three pin mains plug foryour safety and convenience.A 5-ampere fuse is fitted in this plug.Should the fuse need to be replaced please ensure that the re-placement fuse has a rating of 5-ampere and that it is approved byASTA or BSI to BS1362.Check for the ASTA mark m or the BSI mark o on the body ofthe fuse.If the plug contains a removable fuse cover you must ensure that itis refitted when the fuse is replaced.If you lose the fuse cover the plug must not be used until a replace-ment cover is obtained.A replacement fuse cover can be purchased from your local dealer.If a new plug is to be fitted please observe the wiring code asstated below.If in any doubt please consult a qualified electrician.IMPORTANTThe wires in this mains lead are coloured in accordance withthe following code:Blue: Neutral, Brown: Live.As these colours may not correspond with the coloured mark-ings identifying the terminals in your plug, proceed as follows:The wire which is coloured Blue must be connected to the ter-minal which is marked with the letter N or coloured Black orBlue.The wire which is coloured Brown must be connected to the termi-nal which is marked with the letter L or coloured Brown or Red.Before useRemove the connector cover.How to replace the fuseThe location of the fuse differ according to the type of AC mainsplug (figures A and B). Confirm the AC mains plug fitted and followthe instructions below.Illustrations may differ from actual AC mains plug.1. Open the fuse cover with a screwdriver.2. Replace the fuse and close or attach the fuse cover.Caution for AC Mains LeadCAUTION!IF THE FITTED MOULDED PLUG IS UNSUITABLEFOR THE SOCKET OUTLET IN YOUR HOMETHEN THE FUSE SHOULD BE REMOVED ANDTHE PLUG CUT OFF AND DISPOSED OF SAFELY.THERE IS A DANGER OF SEVERE ELECTRICALSHOCK IF THE CUT OFF PLUG IS INSERTEDINTO ANY 13-AMPERE SOCKET.WARNING: DO NOT CONNECT EITHER WIRE TO THEEARTH TERMINAL WHICH IS MARKED WITH THE LETTERE, BY THE EARTH SYMBOL n OR COLOURED GREEN ORGREEN/YELLOW.THIS PLUG IS NOT WATERPROOF—KEEP DRY.Figure A Figure BFuse(5 ampere)Fuse(5 ampere)Figure A Figure BFuse coverUsing headphones (not included)Turn down the volume and connectthe headphones to the [PHONES]jack.Plug type: 3.5 mm stereoNoteAvoid listening for prolonged periods oftime to prevent hearing damage. PHONES~~• If this unit is not used for a long period of time or is used onlyfrom an AC power source, remove all the batteries to preventpotential damage due to possible battery leakage.• Align the poles (+ and –) properly when inserting the batteries.• Do not mix old and new batteries or different types of batteries.• Do not recharge ordinary dry cell batteries.• Do not heat or disassemble the batteries. Do not allow them to contactflame or water.• Do not keep together with metallic objects such as necklaces.• Do not use rechargeable type batteries.• Do not use batteries if the covering has been peeled off.Mishandling of batteries can damage other items, cause damage to theunit, and may cause a fire through short-circuiting or electrolyte leakage.If electrolyte leaks from the batteries, consult your dealer.Wash thoroughly with water if electrolyte comes in contact with any partof your body.Use of Batteries