10717.6 Wireless Remote Control Local Setting Mode• Press the SET button (2) to enter Local SettingMode• Press Temperature Up / Down button to selectMode No.• Press Timer Up / Down button to select settingvalue.• Press Timer SET button (1) to confirm the selection.• Setting display for 4 seconds, exits from LOCALSETTING MODE. If no operation is performed for30 seconds, exit LOCAL SETTING MODE.ModeNo. Items Setting valueIndividualSettingNote 1)00 Centralized control address 000 – 200: Address 0 – Address 200 ○01 Fan speed up 000: OFF 001: ON000: Execute Reset(Level 0)Nighttime low noise001 – 003: Level 1 – Level 3Nighttime low noise ON time 0:00 23.50 (10 minutes interval)02Nighttime low noise OFF time 0:00 23.50 (10 minutes interval)000: Default control001: 10 seconds fan sampling operation03 Thermostat OFFindoor fan control002: Fixed fan speed operation○000: default Thermostat OFF point (ΔD)001: Cool = ΔD+2°C, Heat = ΔD-2°C002: Cool = ΔD+4°C, Heat = ΔD-4°C003: Cool = ΔD-2°C, Heat = ΔD+2°C04 Thermostat OFFpoint adjustment004: Cool = ΔD-4°C, Heat = ΔD+4°C○000: Clear address06 Outdoor unit address 001 – 199: Address 1 - Address 199 ○Note 1) Mark ○ in the column of the “Individual setting” shows a setting item individually made for each connectedindoor unit.Note 2) “R” represents remote control and I “indoor unit”.Note 3) Start the setting from the setting value 000.17.6.1 Night Time Low Noise• This control turns down outdoor unit operation noise by limiting compressor and outdoor fan speed.Setting Value Description Remark000 Not set Normal Noise Level001 Level 1 Low Noise Level002 Level 2 Lower Noise Level003 Level 3 Lowest Noise Level• Ensure current time is set correctly at remote control.• To enable Night Time Low Noise:o Press SET button (2) to enter local setting modeo Press Temperature Up / Down button to select Mode No. 2o Press Timer Up / Down button to select 001, 002 or 003 for the noise level.o Press Timer SELECT button and then press Timer Up / Down button to set Night time low noise OFF time.o Press Timer SET button (1) to confirm the OFF time and continue set Night time low noise ON time.o Press Timer Up / Down button to set the ON time for Night Time Low Noise.o Press Timer SET button (1) to confirm the ON time.o After 2 seconds, exits from local setting mode.