Panasonic S-22MU1E5A Technical Data Manual

Also see for S-106MF2E5A: Installation instructions Installation instructions Installation instructions Installation instructions Operating instructions

Panasonic S-22MU1E5A Technical Data Manual Manual pdf 131 page image

4-25VRF SYSTEMS Indoor Unit Specifications1234567892. Low Silhouette Ducted Type (F2 Type)2-1. SpecificationsUnit specifications (A)INDOOR MODEL S-15MF2E5A S-22MF2E5A S-28MF2E5APANEL MODEL - - -PERFORMANCE TEST CONDITION ISO15042 / AS / NZS3823 / EN14511 / EN12102POWER SUPPLY ø, Hz 1ø 50/60Hz 1ø 50/60Hz 1ø 50/60HzV 220 230 240 220 230 240 220 230 240COOLINGCAPACITYkW 1.50 1.50 1.50 2.2 2.2 2.2 2.8 2.8 2.8BTU/h 5100 5100 5100 7500 7500 7500 9600 9600 9600kcal/h(Fri./h) - - - - - - - - -CURRENT A 0.60 0.57 0.56 0.60 0.57 0.56 0.60 0.57 0.56INPUT POWER W 70 70 70 70 70 70 70 70 70ANNUAL CONSUMPTION W *4 - - - - - - - - -EER/EER CLASS (W/W)*5/("A"~"G") - - - - - - - - -EER BTU/hW - - - - - - - - -POWER FACTOR % - - - - - - - - -NOISE INDOOR(H/M/L)dB-A 33/29/22 33/29/22 33/29/22Power Level dB 55/51/44 55/51/44 55/51/44NOISE OUTDOOR(H/L)dB-A - - -Power Level dB - - -HEATINGCAPACITYkW 1.70 1.70 1.70 2.5 2.5 2.5 3.2 3.2 3.2BTU/h 5800 5800 5800 8500 8500 8500 10900 10900 10900kcal/h(Fri./h) - - - - - - - - -CURRENT A 0.60 0.57 0.56 0.60 0.57 0.56 0.60 0.57 0.56INPUT POWER W 70 70 70 70 70 70 70 70 70COP/COP CLASS (W/W)*5/("A"~"G") - - - - - - - - -COP BTU/hW - - - - - - - - -POWER FACTOR % - - - - - - - - -NOISE INDOOR(H/M/L)dB-A 33/29/22 33/29/22 33/29/22Power Level dB 55/51/44 55/51/44 55/51/44NOISE OUTDOOR(H/L)dB-A - - -Power Level dB - - -EXTRA LOW TEMP CAPACITY(kW)/INPUT POWER(W)/COP - - -Cooling MAX CURRENT(A)/MAX INPUT POWER(W) 0.86 / 105 0.82 / 105 0.79 / 105 0.86 / 105 0.82 / 105 0.79 / 105 0.86 / 105 0.82 / 105 0.79 / 105Heating MAX CURRENT(A)/MAX INPUT POWER(W) 0.86 / 105 0.82 / 105 0.79 / 105 0.86 / 105 0.82 / 105 0.79 / 105 0.86 / 105 0.82 / 105 0.79 / 105STARTING CURRENT(A)/COMP OUTPUT(W) - - - - - - - - -NETWORK IMPEDANCE (ΩMAX.) *3 - - -FM OUTPUT (ID/OD) W 119 119 119MOISTURE REMOVAL VOLUME L/h(Pt/h) 0.9 (1.9) 1.3 (2.7) 1.6 (3.4)External static pressure Pa 70 (MIN10 - MAX150) 70 (MIN10 - MAX150) 70 (MIN10 - MAX150)I/D AIRFLOWCOOL m 3 /min (ft3 /min) 14/13/9 (494/459/318) 14/13/9 (494/459/318) 14/13/9 (494/459/318)HEAT m3 /min (ft3 /min) 14/13/9 (494/459/318) 14/13/9 (494/459/318) 14/13/9 (494/459/318)O/D AIRFLOWCOOL m 3 /min (ft3 /min) - - -HEAT m 3 /min (ft3 /min) - - -REFRIGERANT TYPE, AMOUNT g(oz) - - -PRODIMHEIGHT : H mm(inch) 290 (11-7/16) 290 (11-7/16) 290 (11-7/16)WIDTH : W mm(inch) 800 (31-1/2) 800 (31-1/2) 800 (31-1/2)DEPTH : D mm(inch) 700 (27-9/16) 700 (27-9/16) 700 (27-9/16)PACDIMHEIGHT : H mm 355 355 355WIDTH : W mm 1014 1014 1014DEPTH : D mm 850 850 850MASS (NET) kg(lb) 29 (64) 29 (64) 29 (64)(GROSS) kg(lb) 36 (80) 36 (80) 36 (80)LAYERS LIMIT (actually) 9 (10) 9 (10) 9 (10)OperationConditionCool (DBT) - - -Heat (DBT) - - -PIPINGPIPE DIAMETER mm (inch) (Liquid) ø6.35 (1/4) (Gas) ø12.7 (1/2) (Liquid) ø6.35 (1/4) (Gas) ø12.7 (1/2) (Liquid) ø6.35 (1/4) (Gas) ø12.7 (1/2)CONNECT METHOD, STD LENGTH m (ft) flared type flared type flared typePIPE LENGTH RANGE m (ft) - - - - - -I/D & O/D HEIGHT DIFFERENCE m (ft) - - - - - -ADD GAS AMOUNT g/m (oz/ft) - - - - - -PIPE LENGTH FOR ADDITIONAL GAS m (ft) - - - - - -*3 Network Impedance shall be applicable for EUROPE and CHINA models.*4 The annual consumption is calculated by multiplying the input power at 230V(400V) by an average of 500 hours per year in cooling mode.*5 EER and COP classification is at 230V(400V) only in accordance with EU directive 2002/31/EC.* In case it is necessary to indicate the air flow volume in (l/s), the value in (m3/min.) shall be multiplied by 16.7 and rounded down the decimal point.* If the EUROVENT Certifi ed models can be operated under the "extra-low" temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage230V shall be used.