Panasonic S-45PU1E5 Technical Data & Service Manual

Also see for S-100PF1E5: Operating instructions Operating instructions Technical data & service manual Operating instructions Operating instructions

Contents

Panasonic S-45PU1E5 Technical Data & Service Manual Manual pdf 728 page image

8-2488-18. CZ-RWSC21. Accessories2. Installing the ReceiverWhen using a separately installed receiver as a built-in model, install it to the JIS switch box (field supply) shownin the diagram on the right, which has been built into the wall on site in advance.(1) Remove the face plate of the receiver by slipping a slotted screwdriver or the like into the cutout on the bottom.(2) Install the receiver with the 2 enclosed small M4 screws.(3) Connect the receiver’s wiring (2 cores) with the wiring from the indoor unit. (Refer to the chapter on wiring the receiver)When wiring receivers, be sure to double-check the terminal numbers of the indoor unit before connecting them sothere are no mistakes in the wiring. (Damage will occur if high voltage [e.g. supply voltage] is applied)(4) Attach the face plate.Fig. 8-241 Receiver(Enclosed 200 mm wiring) 12 Remote Control 13 Remote Control Holder 14 2Dry-cell Batteries1Users Manual45 Truss Self-Tapping Screws4 X 1626 Small screw 27 Wood screw 28 Cable tie 1M4 X 25 Small screws (2)Receiver UnitSpacersSingle outlet switch box (no cover)Face PlateCutoutNo. Accessories Quantity No. Accessories Quantity