7Tips for Energy SavingAttention:z Never use your hands to move the flap (vertical airflow flap)controlled using the remote controller.Notez When the air conditioner is turned off, the flap automaticallymoves toward the direction of closing.z The flap (vertical airflow flap) moves to the upward positionduring standby operation for heating.z The swing operation starts after the standby operation hasfinished, but “Swing” is indicated on the remote controllereven during the standby operation. Avoidz Do not block the air intake and outlet of the unit.(If either is obstructed, the unit will not functionwell, causing malfunction.)z During cooling operation, use sunshades, blinds or cur-tains to prevent direct sunlight from entering the room. Doz Always keep the air filter clean.(A clogged filter will impair the performance of the unit.)→ “Maintenance” (P.8)z To prevent conditioned air from escaping, keep win-dows, doors and any other openings closed.Adjusting airflow direction for multiple indoor units (Timer remote controller only) When setting the airflow direction ofeach indoor unit individually1 Press to select the Unit No.for adjustment.2 Press to select your desiredairflow direction. When setting the airflow direction ofall indoor units at the same time1 Press to select No display .2 Press to select your desiredairflow direction.1-12-13-14-18-1“UNIT” button“FLAP” buttonz Maximum of8 indoor unitscan be connected.Unit No.When operating multiple indoor units using 1 remote controller, airflow direction can be adjusted for indoor each unit individually orall units at the same time.e.g.) 8 outdoor unitNo display1-12-13-14-18-1