309 Disassembly and Assembly Instructions• Illustration is based on SA-AKX32PH-KCaution Note:• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main components forthe unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service manual)• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.• During the disassembly and/or assembly process, please handle with care as there may be chassis components withsharp edges.• Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)• During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-vice manual.• Select items from the following indexes when disassembly or replacement are required.• Disassembly of Top Cabinet• Disassembly of Tuner P.C.B.• Disassembly of Front Panel Unit• Disassembly of Panel P.C.B.• Disassembly of Remote Sensor P.C.B.• Disassembly of Jupiter P.C.B.• Disassembly of USB P.C.B.• Disassembly of Music Port P.C.B.• Disassembly of CD Lid• Disassembly of Main P.C.B.• Replacement of Voltage Regulator IC (IC2010)• Disassembly of D-Amp P.C.B.• Replacement of Audio Digital Amp IC (IC5900)• Disassembly of SMPS P.C.B.• Replacement of Switching Regulator IC (IC5701)• Replacement of Rectifier Diode (D5702)• Replacement of Rectifier Diode (D5801)• Replacement of Rectifier Diode (D5802)• Replacement of Rectifier Diode (D5803)• Disassembly of CD Mechanism Unit (BRS1C)• Disassembly of Rear Panel• Disassembly of Voltage Selector P.C.B.