The radio22RQT5918You can tune radio stations manually by selecting the station’sfrequency, or you can preset up to 30 stations into channels tomake tuning simpler (\ page 23).1 Turn [INPUT SELECTOR] to select“TUNER”.2 Press [BAND] to select “FM” or “AM”.3 Press [TUNING 2 or 1] to select thefrequency of the station.Tuning intervals: FM – 0.2 MHzAM – 10 kHz“TUNED” lights when tuned.“STEREO” lights during FM stereo broadcasts.Automatic tuningHold down [TUNING 2 or 1] until the frequency begins to scroll.Tuning stops when a station is found. (Tuning may stop if there isinterference.)Improving reception¡FM modeYou can improve FM reception by switching reception tomonaural.Press [FM MODE].“MONO” lights.Press [FM MODE] again to cancel.¡DSP DEFEATYou can improve reception by turning off the DSP (a page 16).Press and hold [DSP SOUND MODE] until “DEFEAT” appears.Press and hold [DSP SOUND MODE] again to turn the DSP on.¡For your referenceDVD players can interfere with radio reception. Turn the DVDplayer off or move it further away from the antennas if thisoccurs.Manual tuningqq Press [TUNER/BAND].The band changes each time you press the button.ww Press [DIRECT TUNING/DISC ENTER].ee Press the numbered buttons to enter thefrequency.e.g. To select 107.9 MHz, press [1] / [0] / [7] / [9]Tuning intervals: FM – 0.1 MHzAM – 10 kHz1. If you do not press a button while the cursor is flashing, thedisplay returns to the frequency being received.2. If the frequency has not been input correctly, “ERROR” will bedisplayed.Note12FM MODE DSP SOUND MODE3123TVTUNER/BANDVCRTAPE3216 ≥10/ENTER549 087TOP MENUENTERMENUDISPLAYDELAYDISC/DECK 1/2LEVELSOUND MODE SFCTV /VIDEO CHVOLUMEMUTINGTEST++––SUBWOOFERCDDVDDIRECT TUNING/DISC ENTER//AUDIO123BA AB Direct tuningINPUT SELECTORBANDMHzTUNINGTUNEDSTEREOMHz