Panasonic SA-HT535EE Service Manual

F880 Unsuitable task number When a message arrives from not existing taskError Code Meaning DetailsF890 A message is sent during AV tasktransmissionDuring transmission of a message to AV taskF891 Unable to transmit a message to AVtaskWhen transmission of a message to AV task startsF893 FROM alteredF894 EEPROM failureF8A0 Unsuitable message command When transmission of a message to AV task starts14.5. Mode Table 2Following modes are available with combinations of the pressed buttons on the player and onthe remote controller unit.Item OperationalCondition andKey FunctionDetails Display ToJitterdisplayWhile the playeris stopped andno disc isinserted, pressand hold downthe buttonon the playerand the numberbutton, “5” onthe remotecontroller unit.Press “FLDISPLAY”button onremote controlfor next page.Jitter display / Measuresand displays jitter.Measurement is repeatedevery second. Read errorcounter starts at 0 at themode setting, and increasedby one as data read fails attarget block. A small defectis allowed to correct byretry. Any possibility iscounted as one increment.Repetitive errors after retryincrease by two levels ormore.J*1 ___123*2_/ _456*3 _AB*4_ /[display1/display2] / *1 : Jitterdisplay mode / *2 : Jittermeasurement value / *3 : Readerror counter / *4 : Focusdriving valueValues are shown to onedecimal place in the decimaldigit.Focus driving value isdisplayed in the hexadecimaldigit.PressSTOPError codedisplayWhile the playeris stopped andno disc isinserted, pressand hold downthe buttonon the playerand the numberbutton, “0” onthe remotecontroller unit.Error code display /Displays the latest errorcode stored in EEPROM.DVDnn_F--- / *nn: Error history/ *--: Error numberAutomaticallyexitsmodefive26PDF created with pdfFactory Pro trial version www.pdffactory.com