Panasonic SA-HT940PC Service Manual

Also see for SA-HT940P: Service manual Service manual supplement

Contents

10.6. Disassembling the Rear Panel· Follow (Step 1) to (Step 2) of Item 10.3.Step 1 Remove 9 screws.Step 2 Detach the FFC cable from connector (CN5704).Step 3 Release the claws of the rear panel in the directions.Step 4 Remove the rear panel in the direction of arrow.10.7. Disassembling the MechanismBase Assembly· Follow (Step 1) to (Step 3) of Item 10.5.Step 1 Remove 2 screws on each side of the mechanism baseblock.Caution: Take note of the screw type used. Duringassembling, use the correct screw type and at the correctlocation.Step 2 Detach FFC cable at connector (CN2005).Step 3 Detach FFC cables at connectors ( FP8251 & FP8531).Step 4 Remove the mechanism base block.10.8. Disassembling the FL & Headphone P.C.B.· Follow (Step 1) to (Step 7) of Item 10.4.· Disassembly of the panel angle. [(Step 1) to (Step 2) of thefollowing]Step 1 Remove 3 screws.Step 2 Remove the panel angle.Step 3 Remove 7 screws.35SA-HT940P / SA-HT940PC