Step 3 Solder pins of the regulator IC (IC2903) on the reverseside of Power Supply P.C.B.Step 4 Solder pins of the hestsink extrussion on the reverseside of Power Supply P.C.B.Special Note: Ensure pins of the regulator IC (IC2903) areproperly seated and soldered on Power Supply P.C.B.9.28. Disassembly of DVD ModuleP.C.B.•••• Follow (Step 1) to (Step 3) of Item 9.3.•••• Follow (Step 1) to (Step 9) of Item 9.14.Step 1 Detach 50P FFC cable at the connector (CN2001) onMain P.C.B.Step 2 Move aside Main P.C.B. and position it according to thediagram shown.•••• Disassembly at HDMI Shield Plate UnitStep 3 Remove 2 screws from the HDMI shield plate unit.Step 4 Remove the HDMI shield plate unit.Caution Note: Keep the HDMI shield plate unit in safeplace. Avoid denting it. Place it back during assembling.Step 5 Detach 7P cable at the connector (FP8251) on DVDModule P.C.B.Step 6 Detach 26P cable at the connector (FP8531) on DVDModule P.C.B.Step 7 Detach 5P cable at the connector (FP9001) on DVDModule P.C.B.63SA-PT560E / SA-PT560EB / SA-PT560EG
