21RQT8552When using a Panasonic DVDrecorderChange the unit’s remote control code tomatch the remote control code of the DVDrecorder.Confirm the DVD recorder’s remote controlcode number according to its operatinginstructions.1 Press [DVD RECORDER].2 Press and hold [ENTER] togetherwith [1], [2], or [3] for 2 secondsor longer.• [Mode 1], [Mode 2], or [Mode 3] is set onthe remote control according to thepressed button.• The factory setting is [Mode 1].When DVD drives do not switchThe condition may mean the DVDrecorder does not recognize thesignal this unit’s remote controltransmits.Switch the drives again afterchanging the signal in the followingprocedure.1 Press [DVD RECORDER].2 While pressing [ENTER], pressand hold [8] for approximately2 seconds.To return:In step 2 above, while pressing [ENTER],press and hold [9] for approximately2 seconds.To switch theunit’s input to“DVD ”/To switchthe remotecontrol to theDVD playeroperation modeDo not forget todo this beforeoperating a DVDplayer.To turn the DVDplayer on or offTo skip a trackor chapterTo look for ascene you wishto watchTo play aprogram at aslow speedTo startplaybackTo show thedirect navigator(or the topmenu)To show a submenuTo show thefunctionalselectionscreen (Whilestopped)To return to theprevious screenTo select anitemTake this step afterpressing the [DIRECTNAVIGATOR, TOPMENU], [S, SUB MENU],or [FUNCTIONS].DVDPLAYERANALOG 6CHAVSYSTEMSKIPSLOW/SEARCHPAUSESLOW/SEARCHPLAYDIRECTNAVIGATORTOPMENUSUB MENUFUNCTIONSRETURN[FUNCTIONS] activates display functionson some of the Panasonic DVD players.To execute theselected itemTo specify adisc (5-discchanger only)To select a trackor chapterdirectly• Some of themodels requireyou to press[ENTER] forexecution afterpressing numberbuttons.To pauseTo moveforward andbackward frameby frameTo stopplaybackENTERDIRECT TUNINGDISC0 -/--PAUSEPAUSESTOPNoteRemote controlling a DVD playerRemote controlling a TV or DVD recorder etc. ENGLISH