Panasonic SA-XR57K Operating Instructions Manual

Also see for SAXR57 - RECEIVER: Owner's manual Operating instructions

Contents

19RQT8549Using HDAVI Control1. Connect the unit to a Panasonic TV (VIERA) and DVD recorder (DIGA) under HDAVI Control using the HDMI cable (á page 5).(It is recommended that you use Panasonic’s HDMI cable. Depending on the cable used, this function may not be possible.)2. Make settings on the TV (VIERA) to activate HDAVI Control.3. Turn all equipment on, switch the TV off, put it back on, and check if it shows pictures correctly. (Take these steps afterchanging connections or settings.)Available models (As of April 2006)TV (VIERA):TH-42/50/58PX600, TH-37/42/50PX60, TH-58PX60, TH-42PD60, TH-42/50PX6DVD recorder (DIGA): DMR-ES25, DMR-ES45V, DMR-EH55, DMR-EH75V, DMR-ES46VWhat is HDAVI Control?HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or DVD recorder(DIGA) under HDAVI Control. You can use this function by connecting the equipment with the HDMI cable. See the operatinginstructions for connected equipment for operational details.OUT (DVD RECORDER) INThe unit’s rear viewTV HDMI(AV IN)DVD HDMI(AV OUT)TV (VIERA)DVD recorder (DIGA)Enjoying Home Theater features through one-touch operationsDirect the remote control to the DVD recorder (DIGA)and press [ONE TOUCH PLAY].The unit performs the following operation automatically when you simply press [ONE TOUCH PLAY].1. The DVD recorder goes on.• The DVD recorder starts playing a disc that is in.• The DVD recorder plays back a recorded TV program (the last recorded program) when a disc is not in.2. The TV goes on and the TV input changes.3. This unit goes on and the selector changes to “DVR ”, and Multi-channel playback starts.When adjusting the volume: Press [ + VOLUME - ].You can also adjust the volume on your TV (VIERA)’s remote control.(A message informing the action appears on your TV while you adjust the volume.)• Press [u SKIP] and start playing a DVD disc or a recorded TV program again when playbackdoes not start from the beginning.• This unit automatically goes off when you switch your TV (VIERA) off. (This operation is unavailable when you set the input sourceas TUNER or CD on this unit.)• Audio output automatically moves to speakers on your TV (VIERA) when you turn the unit off.Audio output moves from speakers on the TV (VIERA) to speakers connected to the unit when you turn the unit on.• This unit goes from off to on and speakers connected to the unit start producing sounds when you make settings for Home theateron your TV (VIERA).To play back TV sounds on multi-channelsYou must make digital audio (OPTICAL) output connections (á page 9) for doing this.The input source for the unit changes to “TV ” when you select a TV channel or operate the TV in other ways (á page 20).ONETOUCHPLAYGATOROPMENUFUN0ANALOG 6CHBANDCHVOLUMEDIRECT TUNING ENTERSKIP SLOW/SEARCHSTOP PAUSE PLAYDRIVE SELECT DVD RECORDER CM SKIPDISCONETOUCHPLAYNoteSetting the unit against HDAVI Control operations1 Press and hold [-MENU, - SETUP, RETURN] forapproximately 2 seconds.2 Select and confirm the setting.3 Select and confirm the setting.4 Select and confirm the setting.OFF:Setting for canceling linked operationsON: Setting for activating linked operations (Factory setting)5 Press [-MENU, –SETUP, RETURN] 2 times to select“EXIT ” and press [ENTER].MENUSETUPRETURNINPUT SELECTORENTERINPUT SELECTORENTERMENUSETUPRETURNINPUT SELECTORENTERVOLUMEHDMIMENUSETUPRETURNTurn tomake achoice.Press toconfirmyourchoice.To return tothe previousdisplay/TocancelBasic operationPlayback options Basic operations Using HDAVI Control