Wireless Speaker SystemModel No. SC-NE5SC-NE3You can wirelessly stream music from an iOS device, an Android TM device or aMac/PC to SC-NE5/SC-NE3’s speakers. To use this music-streaming feature,SC-NE5/SC-NE3 must join the same 2.4 GHz wireless network as the compatibledevice through the wireless network router (access point).*1: Refer to the Operating Instructions for the compatibility.Screen images used in this sheet : iPhone 4S, iOS 6.0.1Wi-Fi® connection guideiOS device *1 , Android deviceor Mac/PCWireless networkrouterSC-NE5/SC-NE3VQC93991 Press and hold [s WPS] onthe speaker unit for more than3 seconds.2 Press the WPS button on thewireless network router.3 Press [OK] on the remotecontrol to exit.Blinks in blue2The settings are completed when“SUCCESS” is displayed and indicatorlights in blue.*2 : The marking may differ.Lights in blueYes No / Do not knowSC-NE3SC-NE5NoYesStart wireless network settingsPreparation1 Place SC-NE5/SC-NE3 close to the wireless network router.2 Turn this system on.3 Follow the chart below to choose the network setting method.≥ If you want to perform wireless setting with your Mac/PC, or you want to apply the advancedsetting, refer to [SC-NE5] “Method 4” or [SC-NE3] “Method 3” in the operating instructions.The following explanations are based on an iPhone.Lightning connector compatible iPodtouch/iPhone:iPod touch/iPhone/iPad withiOS 5.0 or later:1 Disconnect any devicesconnected to the CD unit.2 Connect the iPhone to yourhome wireless network.3 Connect the iPhone to the CDunit.Choose one of the followingconnections.Dedicated cable supplied with the iOSdevice4 Unlock your iPhone and thenpress and hold[sNETWORK SETUP] on theCD unit for more than 3seconds.5 A message will pop-up on theiPhone. Allow the iPhone toshare the wireless networksettings.6 The settings are completedwhen “SUCCESS” is displayedand the indicator on thespeaker unit lights in blue.7 Press [OK] on the remotecontrol to exit.You can make the wirelessnetwork settings with the app,“Panasonic Stereo SystemNetwork Setup” (for free).If you’re using an Android device,download the app at the GooglePlay TM Store. If you’re using aniPod touch/iPhone/iPad,download it at the App Store.Preparation≥Connect your smartphone toyour home wireless network.≥Check the password for yourhome wireless network.∫ Note for the iOS versionAfter step 21 Enter the password for the homewireless network to which the iOSdevice is connected.2 When a message instructing youto connect the iOS device to thissystem is displayed, press thehome button to close the app.3 On the Wi-Fi network selectionscreen in “Settings”, select“00 Setup _ _ _ _ _ _”.4 When a message indicating thecompletion of the connection tothis system is displayed, restartthe app.5 When a message indicating thecompletion of the Wi-Fi setup ofthis system is displayed, close theapp, and then check the operationof AirPlay, etc.1 Press [SETUP] on the remotecontrol repeatedly to select“NET SETUP” and then press[OK].2 Start “Panasonic StereoSystem Network Setup” onyour smartphone and followthe indications.Using AirPlayThe following explanations are based on aniPhone.Preparation≥Turn this system on.1 Connect the iPhone to your home wireless network.2 Select “Panasonic NE5 (NE3) _ _ _ _ _ _” from the AirPlay icon and start play.“Settings” “Wi-Fi” Turn on Your home wirelessnetwork name(SSID)*3*3 : You may be prompted for the password. Enter the password of your home wireless network.“Music”“Panasonic NE5 (NE3) _ _ _ _ _ _”Play starts.(with a slight delay)Does your wireless network router supportWPS (Wi-Fi Protected Setup TM)?Are you using an iPod touch/iPhone/iPad?Is the iOS version 5.0 or later?Which model do you use?WPS button method Using the iPod dock (SC-NE5 only) Using the smartphone app