Panasonic SC-NE3 Operating Instructions Manual

Also see for SC-NE3: Owner's manual Connection guide Owner's manual Quick guide Operating instructions

Contents

17VQT4U511 Measure and mark the position of the wall mountbrackets (Both sides).{. Use figures below to identify the screwing positions.The position to attach the wall mount bracketsSpace required2 Attach the wall mount bracket to the wall with 2screws (not supplied). (Both sides)≥ Use a level to ensure both wall mount brackets are level.3 Fix the safety holder onto the unit with the screw(supplied).{. Screw tightening torque: 50 N0cm to 70 N0cm.4 Attach the fall prevention cord (not supplied) to thisunit.5 Hook the unit securely onto the wall mountbrackets with both hands.≥ Connect the AC mains lead to the unit before hangingthe unit onto the wall. (l 6)≥ After hanging the unit, release your hands carefully toconfirm the unit sits securely on the wall.6 Drive the safety holder fixing screw (not supplied)to secure the safety holder onto the wall.≥ Refer to step 2 for requirements before screwing.7 Attach the fall prevention cord (not supplied) to thewall.≥ Make sure that the slack of the cord is minimal.Wall mount instructionsBefore installation, turn the unit off and disconnect theAC mains lead from the mains socket.252 mm12.5 mm300 mm319 mm770 mm83 mm252 mm82 mm169 mm570 mm67 mm122 mmAt least 30 mm‰7.5 mm to‰9.4 mm‰4 mmWall mount bracketScrew(supplied)Cord(not supplied)WallSafety holder fixing screw(not supplied)Safety holderFixed to the wallCord (not supplied)Screw eye(not supplied)Wall

/ 20

Related manuals for Panasonic SC-NE3