Panasonic SC-NP10 User Manual

Also see for PTLW80NTU - LCD PROJECTOR - MULTI LANGUAGE: Specifications Operating instructions Brochure & specs

Owner’s ManualWireless Speaker SystemModel No. SC-NP10Thank you for purchasing this product.Please read these instructions carefully before using this product, and save this manual for future use.Register online at www.panasonic.com/register (U.S. customers only)If you have any questions, contact:U.S.A. and Puerto Rico : 1-800-211-PANA (7262)Canada : 1-800-561-5505P PCPrinted in MalaysiaPanasonic Corporation 2013One Panasonic Way, Secaucus,New Jersey 07094http://www.panasonic.comPanasonic Consumer MarketingCompany of North America,Division of Panasonic Corporationof North America5770 Ambler DriveMississauga, OntarioL4W 2T3Panasonic Canada Inc.www.panasonic.caIMPORTANT SAFETY INSTRUCTIONSRead these operating instructions carefully before using the unit. Follow the safety instructionson the unit and the applicable safety instructions listed below. Keep these operatinginstructions handy for future reference.1 Read these instructions.2 Keep these instructions.3 Heed all warnings.4 Follow all instructions.5 Do not use this apparatus near water.6 Clean only with dry cloth.7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8 Do not install near any heat sources such as radiators, heat registers, stoves, or otherapparatus (including amplifiers) that produce heat.9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug hastwo blades with one wider than the other. A grounding-type plug has two blades and a thirdgrounding prong. The wide blade or the third prong are provided for your safety. If the providedplug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10 Protect the power cord from being walked on or pinched particularly at plugs,convenience receptacles, and the point where they exit from the apparatus.11 Only use attachments/accessories specified by the manufacturer.12 Use only with the cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus. When a cart is used, use cautionwhen moving the cart/apparatus combination to avoid injury from tip-over.13 Unplug this apparatus during lightning storms or when unused for long periods of time.14 Refer all servicing to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power-supply cord or plug isdamaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.WARNINGUnitTo reduce the risk of fire, electric shock or product damage,• Do not expose this unit to rain, moisture, dripping or splashing.• Do not place objects filled with liquids, such as vases, on this unit.• Use only the recommended accessories.• Do not remove covers.• Do not repair this unit by yourself. Refer servicing to qualified service personnel.AC power supply cordThe power plug is the disconnecting device.Install this unit so that the power plug can be unplugged from the socket outlet immediately.CAUTIONUnit• Do not place sources of naked flames, such as lighted candles, on this unit.PlacementTo reduce the risk of fire, electric shock or product damage,• Do not install or place this unit in a bookcase, built-in cabinet or in another confinedspace. Ensure this unit is well ventilated.• Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains,and similar items.Check the supplied accessories before using this unit.1 AC power supply cord (K2CB2CB00022)• Product numbers provided in this Owner’s Manual correct as of February 2013. Thesemay be subject to change.• Do not use AC power supply cord with other equipment.• (ONLY FOR CANADA) The enclosed Canadian French label sheet corresponds to theEnglish display on the unit.THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:≥ Reorient or relocate the receiving antenna.≥ Increase the separation between the equipment and receiver.≥ Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.≥ Consult the dealer or an experienced radio/TV technician for help.Any unauthorized changes or modifications to this equipment would void the user’sauthority to operate this device.This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesired operation.Responsible Party:Panasonic Corporation of North AmericaOne Panasonic Way,Secaucus, NJ 07094Support Contact:Panasonic Consumer Marketing Company ofNorth AmericaTelephone No.: 1-800-211-PANA (7262)THE FOLLOWING APPLIES IN THE U.S.A. AND CANADAThis device complies with Part 15 of FCC Rules and Industry Canada licence-exemptRSS standard(s).Operation is subject to the following two conditions:(1) This device may not cause interference, and(2) this device must accept any interference, including interference that may causeundesired operation of this device.FCC ID : ACJ-SC-NP10IC : 216A-SCNP10This transmitter must not be co-located or operated in conjunction with any other antennaor transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for anuncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelinesin Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.This equipment has very low levels of RF energy that is deemed to comply withoutmaximum permissive exposure evaluation (MPE). But it is desirable that it should beinstalled and operated keeping the radiator at least 20 cm (7 7/8q) or more away fromperson’s body (excluding extremities: hands, wrists, feet and ankles).AccessoriesThe lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated “dangerous voltage” withinthe product’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock to persons.CAUTIONCAUTION : TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE SCREWS.NO USER-SERVICEABLE PARTSINSIDE.REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the appliance.RISK OF ELECTRIC SHOCKDO NOT OPENA: You can adjust the tilt of the backrest. Align the support for the backrest with the desiredposition between the lines A.To close the backrest, lift up the support slowly, and push it towards the backrest.Note• When using the AUX input, the Bluetooth® and NFC features are not available.• When using the AUX input, the volume may seem low depending on the connected device.In that case, check if the volume limit can be changed on the device. For details, refer to theoperating instructions of the device.• When the backrest is propped up, do not move this unit or subject this unit to a strong shock.PreparationAfter inserting the AC power supply cord to this unit, turn on the Bluetooth ®feature of the device and place the device near this unit.If you intend to use an NFC (Near Field Communication)-compatible Bluetooth ®device, proceed to “One-Touch Connection (Connecting by NFC)”.For each Bluetooth ® device you want to connect to via Bluetooth® , perform pairing first.Pairing with Bluetooth ® device1 Press [Í/I] to turn this unit on.• The Bluetooth ® indicator blinks slowly.• If this unit is being used for the first time (factory preset state):The Bluetooth® indicator blinks fast. → The unit will enter pairing standby. → Skip to step 3.2 Press and hold [-PAIRING] until the Bluetooth ® indicator blinks fast.• The unit will enter pairing standby.3 Select “SC-NP10” from the Bluetooth ® device’s Bluetooth® menu.• When the Bluetooth® device is paired and connected, the Bluetooth® indicator on the unit lights up.• If prompted for a passkey, input “0000”.• After the connection is established, proceed to “Selecting Transmission mode setting” (right).Connecting a paired Bluetooth® device and listening to audioWhen this unit is turned on, it searches for the last-used Bluetooth ® device.If a connection to the last-used one is successful, the Bluetooth ® indicator onthe unit lights up.If the Bluetooth® indicator blinks, you need to connect the Bluetooth ® device.1 Select “SC-NP10” from the Bluetooth ® device’s Bluetooth® menu.• When the Bluetooth® device is connected, the Bluetooth® indicator on the unit lights up.2 Start playing back music, a movie, etc. on your Bluetooth ® device.• Adjust the volume using the [- VOL +] buttons on the unit.When the maximum or minimum volume is reached, you will be notified by a beep sound.For NFC-compatible AndroidTM devices onlyBy simply touching this unit to an NFC (Near Field Communication)-compatibleBluetooth® device, this unit automatically turns on, and performs the startingoperation, from pairing the Bluetooth® device to establishing a connection.Designed to skip the starting operation, this feature is very convenient.About NFC (Near Field Communication)It is a short range wireless technology that makes use of interacting radio communications.PreparationTurn on the NFC feature of the device. And connect the device to the internet toinstall a dedicated app. Separate data charges apply for the internet use.1 Download the app “Panasonic Music Streaming” (free of charge) toyour Bluetooth ® device from Google PlayTM Store.• Enter “Panasonic Music Streaming” in the search box of Google PlayTM Store and search→ select “Panasonic Music Streaming” to download the app2 Start the app “Panasonic Music Streaming” on your Bluetooth® device.• Follow on-screen instructions on your device.• Always use the latest version of the app.3 Touch and hold your device on the NFC touch area of this unit.(Until a pop-up window on your device indicates that the connection is established.)• When this unit turns on and a connection is established, the Bluetooth® indicator lights up.• When the Bluetooth® indicator does not light up even if you have touched the NFCtouch area, change the touching position.4 Start playing back music, a movie, etc. on your Bluetooth ® device.Connecting to another device• If you touch another device to this unit, you can update the Bluetooth®connection. The previously connected device will be disconnected automatically.Turning off/on the NFC feature of this unitYou can also turn off the NFC feature, if you want to disable the One-TouchConnection. Perform the step below while this unit is turned on.NFC OFF :1 While pressing and holding [- VOL], press and hold [VOL +] until theBluetooth® indicator and the “D.SURROUND” indicator blink once.NFC ON : Refer to “Reset (To the factory preset state)” (back side)• This unit returns to the factory preset state by resetting it.This unit has two transmission modes: “Connectivity Priority MODE” and“Sound Quality Priority MODE”. After confirming that audio can be played back,select the mode while this unit is turned on.1 Set either of the following modes.■ Connectivity Priority MODE:While pressing and holding [D.SURROUND], press and hold [VOL +] untilthe Bluetooth® indicator and the “D.SURROUND” indicator blink once.■ Sound Quality Priority MODE:While pressing and holding [LIGHT], press and hold [VOL +] until theBluetooth® indicator and the “D.SURROUND” indicator blink once.2 Press [Í/I] to turn this unit off, and press [Í/I] again to turn on.• The Bluetooth® connection is automatically established, and the Bluetooth® indicator lights up.• Switch off this unit or the device.• Stop / disable the Bluetooth ® transmission of the device.• (For NFC-compatible devices only)Touch and hold your device to NFC touch area of this unit again.Note• This unit can only be connected to one device at a time.• This unit can register up to 8 devices.If a 9th device is paired, the device that has not beenused for the longest time will be replaced.• This unit automatically turns off (Auto Power Off) if no operation is performed for approximately30 minutes when not connected to Bluetooth® (when the Bluetooth® indicator is blinking).When using the AUX input, the Auto Power Off function does not work.• If the image and sound are out of sync during playback, restart the playback app you are using. Ifthe problem persists, connect the Bluetooth® device and this unit with an audio cable.• The One-Touch Connection may not work properly depending on the type of device being used.Control reference guideListening to audio from a Bluetooth® deviceConnecting via Bluetooth ® menu9STEP 1 STEP 221765 83 410111 NFC touch area•Refer to “One-Touch Connection(Connecting by NFC)”.2 Bluetooth ® indicator3 Light button/Bluetooth® pairing button•You can turn on/off the circle light bypressing this button.4 D.SURROUND button5 “D.SURROUND” indicator6 Volume buttons7 Standby/on switch [Í/I]•Press to switch the unit from on to standbymode or vice versa. In standby mode, the unitis still consuming a small amount of power.8 Power indicator9 AC IN terminal10 USB (type A) DC output ports•When using these ports, use a USB (type A)cable (not supplied).(See “About the DC output ports (USB)”)11 AUX jackOne-Touch Connection (Connecting by NFC)Selecting Transmission mode settingThe default mode is set to “Connectivity Priority MODE” to facilitatechecking of the connection after a device registration.When cordless phones, wireless LAN routers, and other wireless devices thatmay interfere with this unit are not present in the surrounding area, select"Sound Quality Priority MODE". You can enjoy audio with higher quality sound.Disconnecting Bluetooth®VQT4X82F0213DT0SC-NP10PPC.fm 1 ページ２０１３年２月７日木曜日午前１０時３１分

/ 2

Related manuals for Panasonic PTLW80NTU - LCD PROJECTOR - MULTI LANGUAGE