Panasonic SC-PM313 Operating Instructions Manual

Also see for SAPM313 - CD MICRO SYSTEM: Service manual

Contents

4RQT7923To householdAC outlet4 Connect the AC power supply cord.• The included AC power supply cord is for use with this unitonly. Do not use it with other equipment.Getting started3 Connect the speaker cords.Cords with white and blue tags are for high frequency.Cords with red and black tags are for low frequency.Incorrect connection can damage the unit.StepStep 11 - Making the connections- Making the connectionsConnect the AC power supply cord only after all other connections have been made.PreparationTwist and pull off the vinyl tip of the speaker cords.ORIf the speaker cords do not have vinyl tips, directly connect them to the terminals.AM ANTEXTLOOPAM loop antenna1 Connect the AM loop antenna.Stand the antenna up on its base. Keep loose antennacord away from other wires and cords.Optional antenna connectionsOptional antenna connectionsFM outdoor antenna AM outdoor antennaFM ANT75FM outdoor antenna(not included)75 coaxialcable(not included)AM ANTEXTLOOP MAM outdoor antenna(not included)AM loop antenna(included)• Never use an outdoor antenna during a lightning storm.• You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.• Disconnect the FM indoor antenna if an FM outdoor antenna is installed.• Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12m of vinyl-covered wire horizontallyalong a window or other convenient location.2 ,()'(,/7RedBlackWhiteBlueGrey (+)Blue (–)Black (–)Red (+)2 Connect the FM indoor antenna.AdhesivetapeFM indoorantennaTape the antenna to a wall or column, in a position withleast amount of interference.FM ANT75