Panasonic SC-PM4 Operating Instructions Manual

Contents

RQTV02119Sound adjustmentSelecting sound effectsSelecting sound effectsYou can change the sound effect by selecting Preset EQ oradjusting the bass or treble effect.Preset EQPreset EQPress [PRESET EQ] repeatedly to select your desiredsetting.HEAVY → CLEAR → SOFT → VOCAL → EQ-OFFSetting EffectHEAVY Adds punch to rockCLEAR Clarifi es higher frequenciesSOFT For background musicVOCAL Adds gloss to vocalEQ-OFF No effectBass or trebleBass or trebleEnable you to enjoy the lower or higher pitch sound.1 Press [BASS/TREBLE] repeatedly to select yourdesired setting.BASS TREBLEoriginal displaySetting EffectBASS For lower pitch soundTREBLE For higher pitch sound2 Press [ /4] or [ /¢] to adjust the level.NoteThe tone level can be varied within -4 to +4.Enjoying surround soundEnjoying surround soundEnable you to add natural width and depth to the stereosound.To activatePress [SURROUND] to display “ ” indicator.To cancelPress [SURROUND] again to clear “ ” indicator.Note• Surround-sound is less discernible when listening throughheadphones.• If interference in FM stereo reception increases, cancel thesurround-sound effect.External unitConnecting to a portable audio equipmentConnecting to a portable audio equipmentThis feature enables you to enjoy music from portable audioequipment.MUSIC PORTAudio cord (not included)Portable audio equipment(not included)Playing from portable audioPlaying from portable audioequipmentequipmentSwitch off the equalizer function (if there is any) of theportable audio equipment before you plug into the MUSICPORT jack. Otherwise, sound from the speaker may bedistorted.1 Plug the audio cord into the MUSIC PORT jack andpress [MUSIC PORT].2 Play the portable audio equipment. (See theportable audio equipment’s instruction manual.)NoteAll peripheral components and cables are sold separately.Changing the remote control codeChanging the remote control codeChange the code if you fi nd the remote control unintentionallyalso controls other equipments.Change the main unit’s codeChange the main unit’s codePress and hold [MUSIC PORT] on the main unit and thenpress and hold [2] (or [1]) on the remote control.“REMOTE 2” is displayed.Change the remote control’s codeChange the remote control’s codePress and hold [ENTER] and [2] (or [1]) on the remotecontrol for at least 2 second.If the remote control and main unit are using different codes,a message appears on the main unit’s display showing themain unit’s current code. Follow the above step to changethe remote control’s code to match it.

/ 12

Related manuals for Panasonic SC-PM4