Panasonic SDR-H250EB Operating Instructions Manual

Also see for SDR-H20EB: Service manual Operating instructions

Contents

91LSQT1211Others≥ In the following cases, the unit may not turn offeven when you set this to [5 MINUTES].jWhen using the AC adaptorjWhen connecting the unit to a computer orprinter via the USB cable∫ [BEEP SOUND]This allows operations such as starting andending recording to be signaled by a beep.When [OFF] is set, no beep is heard when anoperation such as recording is started or ended.1 BeepWhen you start recordingWhen you turn on the powerWhen this unit is recognised by the computer orthe printer, etc.2 BeepsWhen you pause recordingWhen you turn off the power2 Beeps for 4 timesWhen an error occurs e.g. recording not starting.Check the sentence displayed on the screen.(l 94)∫ [INITIAL SET]When there is a menu that cannot be selecteddue another function or mode being activated,set to [YES] for changing the menu settings backto the initial shipping condition.(The language setting cannot be changed backto the initial shipping condition.)∫ [ILLUMINATION]This allows operations to be signaled by thelighting of the illumination LED on the top of theunit.1 FlashWhen you turn on the power(When in a recording mode: in orange)(When in a playback mode: in blue)2 FlashesWhen you switch the mode to a recording mode(in orange)When you switch the mode to a playback mode(in blue)LightsDuring motion picture recording (in orange)During playback and while connected to acomputer, a printer, etc. (in blue)Flashes continuouslyWhile formatting, copying, deleting, etc. (inorange)∫ [DEMO MODE]This item is used to start the unit demonstration.(Only when using the AC adaptor and the modedial is at the or position)If you set this to [ON] without inserting an SDcard, this unit is automatically set to thedemonstration mode for introducing its functions.If any button is pressed or operated, thedemonstration mode is cancelled. If nooperations take place for approx. 10 minutes, thedemonstration mode automatically starts. Toterminate the demonstration mode, insert an SDcard, or set this to [OFF]. For normal use, set thisfunction to [OFF].≥ [OFF] ≥ [ON]≥ [YES] ≥ [NO]≥ [OFF] ≥ [ON]≥ [OFF] ≥ [ON]LSQT1211(PAL_ENG).book 91 ページ２００７年２月１３日火曜日午後１時１４分