90LSQT1337Setup2 Connection and recognitionAfter the software is installed, the unit must be connected to the PC and be correctly recognized by thePC.≥ Remove the supplied CD-ROM from your PC.¬ Connect this unit to the AC adaptorand turn on the unit.1 Connect this unit to a PC.The USB function selection screen will appear.2 Select [PC CONNECT] # [HDD]or [SD CARD] then press thejoystick.This unit is automatically detected by the PC.≥ When the unit is connected to a PC, itspower cannot be turned off. Disconnect theUSB cable before turning this unit off.(l 91)≥ Do not disconnect the USB cable or ACadaptor while the access lamp is on or accessicon ( or ) appears on the LCDmonitor. Doing so may damage the data on theHDD or SD card.≥ The HDD and SD card cannot be accessedsimultaneously.≥ It may be necessary to reboot the PC afterconnecting this unit to it for the first time.When the unit is connected to a PC, it isrecognized as an external drive.≥ This unit supports only the readout of datausing the PC. The PC cannot write data to theunit, or erase data from the unit.≥ Depending on the operating environment of thePC, the shape of the drive icon and the drivename will differ.∫ Drive iconsThe icon is displayed in [My Computer(Computer)].When accessing the HDD≥ Windows Vista:≥ Windows XP:≥ Windows 2000:12AA USB cable (supplied)≥ Insert the USB connectors as far as they willgo.≥ Do not use any other USB connectioncables except the supplied one. (Operationis not guaranteed with any other USBcables.)About the PC display
