27LSQT1346Setup3 Setting date and timeWhen the unit is turned on for the first time, a message asking you to set the date and time will appear.Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time.¬ Rotate the mode dial to select or .1 Select the menu. (l 24)2 Select the date or time, thenadjust the desired value with thejoystick.≥ The year will change as follows:2000, 2001, ..., 2099, 2000, ...≥ The 24-hour system is used to display the time.3 Press the joystick to enter theselection.≥ The clock function starts at [00] seconds whenthe joystick is pressed.4 Press the MENU button to finishthe setting.≥ Check the date and time displayed.∫ Changing the date and time display modeSelect the menu. (l 24)[SETUP] # [DATE/TIME] # desired displaystyle∫ Changing the date formatSelect the menu. (l 24)[SETUP] # [DATE FORMAT] # desireddisplay style≥ The date and time function is driven by a built-in lithium battery.≥ If the time display is [- -], the built-in lithiumbattery needs to be charged. Use the followingsteps to charge the battery, and then set thedate and time.To recharge the built-in lithium batteryConnect the AC adaptor or insert the battery tothe unit, and the built-in lithium battery will berecharged. Leave the unit as it is for approx.24 hours and the battery will save the date andtime for approx. 6 months. (Even if the modedial is set to OFF, the battery is still beingrecharged.)[BASIC] # [CLOCK SET] # [YES][DATE] [D/T][OFF]15.11.2008 15.11.2008 12:34Display style Screen display[Y/M/D] 2008.11.15[M/D/Y] 11.15.2008[D/M/Y] 15.11.2008
