29LSQT1484RecordingRecording (Basic)2 Recording motion pictures[HDD] [SD]≥ Open the lens cover before turning the unit on.1 Rotate the mode dial to selectand open the LCD monitor.2 Select the recording destinationby the menu. (l 21)3 Press the recording start/stopbutton to start recording.To end the recordingPress the recording start/stop button again.≥ [¥] and [;] are red during recording. Do notmove this unit until [;] is green.≥ The images recorded between pressing therecording start/stop button to start recordingand pressing it again to pause recordingbecome one scene.The scene is automatically divided when therecorded data exceeds 3.9 GB. (The recordingwill continue.)≥ When about 5 minutes have passed withoutany operation in recording pause, the unitautomatically turns off to save battery life.To use the unit, turn it on again.This economy feature can also be set to [OFF].(l 22, [ECONOMY])∫ Screen indicationsA Recording modeB Selected recording destinationC Remaining time left for recordingWhen the remaining time is less than1 minute, [R 0h00m] flashes red.D Recording time elapsedEach time the unit enters the recordingpause mode, the counter display will be resetto “0h00m00s”.≥ While motion picture recording is in progress,the recording will not stop even if the LCDmonitor is closed.≥ Do not disconnect the AC adaptor or removethe battery if the unit is in recording mode. Thismay cause a repair message to appear whenpowered up again. (l 94, About recovery)[MEDIA SELECT] # [HDD] or[SD CARD]R 12h45mR 12h45mR 12h45m0h00m10s0h00m10s0h00m10sSP
