38VQT2N67RecordingRecording (Basic)2 Recording motionpictures≥ Open the lens cover before turning the unit on. (l 12)1 Change the mode to andopen the LCD monitor.2 Press the recording start/stopbutton to start recording.≥ When you begin recording, ; changes to ¥.≥ While recording is in progress, the recordingwill not stop even if the LCD monitor is closed.3 Press the recording start/stopbutton again to pause recording.∫ Screen indications in themotion picture recording modeA Recording modeB Remaining time left for recording(When the remaining time is less than1 minute, [R 0h00m] flashes red.)C Recording time elapsedEach time the unit is put into recordingpause, the counter display will be resetto “0h00m00s”.≥ Still pictures can be recorded whilerecording the motion picture. (l 45)≥ The images recorded between pressingthe recording start/stop button to startrecording and pressing it again to pauserecording become one scene.The scene is automatically divided whenthe recorded data exceeds 1.9 GB. (Therecording will continue.)Normal recording mode:SD CARDMaximum number of recordable scenes: 9801Maximum number of different dates: 99(l 65)(In the case of SD cards it is the maximumnumber of recordable scenes per card.)Built-in Memory/HDD/ /Maximum number of recordable scenes:98901Maximum number of different dates:999 (l 65)Long recording mode:Maximum number of recordable scenes:89100Maximum number of different dates:99 (l 65)When either of them reaches to the maximumlimit, additional scenes cannot be recorded.0h00m00s0h00m00s0h00m00s1 20201 20SP0h00m00s0h00m00s0h00m00sR 1h20mR 1h20mR 1h20mSPSDR-T55 SDR-T50 SDR-H86