77LSQT1473PlaybackWith otherproducts3 With other video devices[HDD] [SD]You can create a playlist by gathering the sceneson the HDD that you want to dub, then dub onlythe scenes in this playlist to other devices.(l 60)≥ Use the AC adaptor to free you from worryingabout the battery running down.1 Connect this unit to a videodevice.2 Turn on this unit, then rotate themode dial to select .3 Select the playback medium bythe menu. (l 22)4 Start playback on this unit.Then start recording on theconnected device.To stop dubbingStop recording on the connected device.Then stop playback on this unit.∫ Using SD card slot or USBterminal of other video devicesIf you have a DVD recorder with an SD card slotor a USB terminal, images recorded by this unitcan be dubbed onto the hard disk or a DVD disc.Refer to the operating instructions of your DVDrecorder for information about whether or not itsupports dubbing from an SD card or a USBterminal.When using a USB terminalConnect this unit to a DVD recorder with the USBcable (supplied), then select [PC/RECORDER]on the USB function selection screen.≥ For details on how to dub the images, refer tothe operating instructions of the DVD recorder.Dubbing images onto othervideo devicesVIDEO INAUDIO INA AV cable (supplied)≥ Insert the plugs as far as they will go.≥ Do not use any other AV cables exceptthe supplied one.≥ If your video device is not equippedwith AV Input Sockets, the 21-pinAdaptor B (purchase separately) isnecessary. Consult your dealer.≥ Select the video input on the videodevice and TV that this unit and thevideo device are connected to.[MEDIA SELECT] # [HDD] or[SD CARD]If you dub images and then play them back ona wide-screen TV, they may be squeezedhorizontally. In this case, refer to the operatinginstructions of the device you are dubbing toor read the operating instructions of the wide-screen TV and set the aspect setting to 16:9(Full).