Panasonic SDR-S15 Operating Instructions Manual

Also see for SDR-S15: Operating instructions

Panasonic SDR-S15 Operating Instructions Manual Manual pdf 42 page image

82 LSQT1438 83LSQT1438Connect this unit to a computer using the USB cable (supplied). (P.76)Display the Device Manager.For Windows 2000Click [Start] → [Settings] → [Control Panel] → [System] → [Hardware] tab→ [Device Manager] button.For Windows XPClick [Start] → [Control Panel] → [Performance and Maintenance] →[System] → [Hardware] tab in the [System Properties] window → [DeviceManager] button.For Windows VistaFrom the Start menu, select [Control Panel] → [System and Maintenance]→ [System] → [Device Manager] (from the [Task] window).If a confirmation window appears halfway through, click the [Continue]button.●●●When the driver is recognised[USB Mass Storage Device] appears in [Universal Serial Bus controllers].(The display differs according to the type of computer.)When the driver is not recognised[!] or [Unknown device] appears in [Universal Serial Bus controllers] or [Otherdevices].Try the following.Method [1] :Turn off the unit and your computer once and turn on again toreconnect.Method [2] :Remove the SD card from the unit and insert it back into theunit.Method [3] : Connect the USB cable to another USB port on the computer.If the driver cannot be recognised by any of the methods above, contact thecomputer manufacturer.•••●With acomputer 8 Checking the connections With acomputer 9 Connecting to a MacintoshcomputerOperating environment required for external drivesOperating environment for the card reader function (Mass storage)SupportedcomputersMacintoshOS Mac OS X v10.4, Mac OS X v10.5CPU PowerPC G5 1.9 GHz or higherIntel ® Core™ Duo, Intel ® Core™ SoloInterface USB portEven if the system requirements mentioned in these operating instructions arefulfilled, some personal computers cannot be used.The USB equipment operates with the driver installed as standard in the OS.Connecting the unit to a computerConnect this unit to a computer using the USB cable(supplied). (P.76)An icon labeled [NO_NAME] or [Untitled] appears on the desktop.Copying still pictures to computersDouble click the [NO_NAME] or [Untitled] icon on the desktop.The still pictures are in the [100CDPFP] folder inside the [DCIM] folder.Drag and drop the still pictures to copy onto the computer.Disconnecting the unitDrag and drop the [NO_NAME] or [Untitled] icon to the Trash.Disconnect the USB cable (supplied) from the computer.●●Apple, Mac OS are registered trademarks or trademarks of Apple Inc. in theUnited States and/or other countries.PowerPC ® is a trademark of International Business Machines Corporation.Intel ® Core™ is registered trademarks or trademarks of Intel Corporation in theUnited States and/or other countries.Other names of systems and products mentioned in these instructions areusually the registered trademarks or trademarks of the manufacturers whodeveloped the system or product concerned.●●●●