Panasonic SDR-S50 Operating Instructions Manual

Also see for SDR-S50: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic SDR-S50 Operating Instructions Manual Manual pdf 35 page image

35VQT2L35This unit will resume recording pause modeabout 0.8 seconds after the LCD monitor isreopened.≥ Start time will not shorten if there is no SDcard inserted.Start time will be shorten if the [HDD] isselected in the [MEDIA SELECT], even ifthere is no SD card inserted.¬ Change the mode to .1 Select the menu. (l 23)2 Close the LCD monitor whilethe mode is set to .The status indicator A flashes green and theunit goes into quick start standby mode.3 Open the LCD monitor.The status indicator A lights red and the unitis put into recording pause.≥ When in quick start standby modeabout 70% of the power used inrecording pause mode is beingconsumed, so the recording time willbe reduced.≥ Quick start standby mode is cancelled ifj about 5 minutes elapsedj mode is set to≥ It may take some time for automatic whitebalance to adjust.≥ In the quick start mode, the zoommagnification becomes 1k.≥ If [ECONOMY] (l 25) is set to[5 MINUTES] and the unit automaticallygoes into quick start standby mode, closethe LCD monitor and then open it again.≥ Turn the unit off using the power button.When the power is turned on with the modeset to , the unit will enter the recordingpause mode after about 1.9 seconds.Select the menu. (l 23)≥ In the quick power on mode, the zoommagnification becomes 1k.Quick start[SETUP] # [QUICK START] # [ON]SDR-H85Quick power on[SETUP] # [QUICK POWER ON] #[ON]