22VQT3E80 (ENG)RecordingRecording (Basic)2 Recording motionpictures≥ Open the lens cover before turning the unit on. (l 9)1 Change the mode to andopen the LCD monitor.2 Press the recording start/stopbutton to start recording.≥ When you begin recording, ; changes to ¥.≥ While recording is in progress, the recordingwill not stop even if the LCD monitor is closed.3 Press the recording start/stopbutton again to pause recording.∫ Screen indications in themotion picture recording modeA Recording modeB Remaining time left for recording(When the remaining time is less than1 minute, [R 0h00m] flashes red.)C Recording time elapsedEach time the unit is put into recordingpause, the counter display will be resetto “0h00m00s”.(“h” is an abbreviation for hour, “m” forminute and “s” for second.)≥ Still pictures can be recorded whilerecording the motion picture.≥ The images recorded between pressingthe recording start/stop button to startrecording and pressing it again to pauserecording become one scene.The scene is automatically divided whenthe recorded data exceeds 1.9 GB. (Therecording will continue.)SD CARDMaximum number of recordable scenes: 9801Maximum number of different dates: 99(In the case of SD cards it is the maximumnumber of recordable scenes per card.)Built-in Memory/HDD/Maximum number of recordable scenes:98901Maximum number of different dates:999When either of them reaches to themaximum limit, additional scenes cannotbe recorded.0h00m00s0h00m00s0h00m00s441J2020O41J20OSP0h00m00s0h00m00s0h00m00sR 1h20mR 1h20mR 1h20mSPSDR-T70 SDR-H100