76 VQT1R00Importing motion pictures and still picturesWhen this unit is connected to the computer, MotionSD STUDIO starts upautomatically.●To use the application with Windows Vista, log on with administratorauthorization or via a standard user account. Guest accounts cannot be used.To use the application with Windows XP or 2000, log on with administratorauthorization.●Before using MotionSD STUDIO, please read [Readme First] by selectingfrom the start menu. This file contains additional instructions or updatedinformation.●The very first time that the software is started up, the End User LicenseAgreement is displayed. Read it carefully and click [I agree].Connect the unit and AC adaptor (P.20) and set the mode dial to a positionother than [OFF].Connect this unit and a computer with the USB cable (supplied).Insert the plugs as far as they will go.Select [PC CONNECT] on the [SELECT USB FUNCTION] screen of the unit.The [SD Browser auto start] dialog box appears.Click [Yes].The [SD Browser] window appears, therefore doas instructed by displayed messages.●Do not use any other USB connection cables except the supplied one.(Operation is not guaranteed with any other USB cables.)●Do not disconnect the USB cable or shut off the power while the cardaccess lamp is lit.●The first time the unit is connected to the computer, the computer may have tobe restarted.●To output motion pictures edited with MotionSD STUDIO to SD cards, use anapplicable SD card. (P.18)●When outputting a large number of scenes to an SD card, DVD-R/RW orDVD-RAM, it may take time to display thumbnails or to output.With acomputer 5 Using MotionSD STUDIO