2VQT2L28Information for Your SafetyDear Customer,We would like to take this opportunity to thank youfor purchasing this Panasonic SD Video Camera,SD/HDD Video Camera. Please read theseOperating Instructions carefully and keep themhandy for future reference. Please note that theactual controls and components, menu items, etc.of your SD Video Camera, SD/HDD Video Cameramay look somewhat different from those shown inthe illustrations in these Operating Instructions.∫ Caution for AC mains leadFor your safety, please read the followingtext carefully.This appliance is supplied with a moulded threepin mains plug for your safety and convenience.A 5-ampere fuse is fitted in this plug.Should the fuse need to be replaced pleaseensure that the replacement fuse has arating of 5-ampere and that it is approved byASTA or BSI to BS1362.Check for the ASTA mark Ï or the BSImark Ì on the body of the fuse.If the plug contains a removable fuse coveryou must ensure that it is refitted when thefuse is replaced.If you lose the fuse cover the plug must not beused until a replacement cover is obtained.A replacement fuse cover can be purchasedfrom your local dealer.If a new plug is to be fitted please observethe wiring code as stated below.If in any doubt please consult a qualifiedelectrician.IMPORTANTThe wires in this mains lead are coloured inaccordance with the following code:Blue: Neutral, Brown: Live.As these colours may not correspond withthe coloured markings identifying theterminals in your plug, proceed as follows:The wire which is coloured Blue must beconnected to the terminal which is markedwith the letter N or coloured Black or Blue.The wire which is coloured Brown must beconnected to the terminal which is markedwith the letter L or coloured Brown or Red.WARNING: DO NOT CONNECT EITHERWIRE TO THE EARTH TERMINAL WHICHIS MARKED WITH THE LETTER E, BYTHE EARTH SYMBOL Ó OR COLOUREDGREEN OR GREEN/YELLOW.THIS PLUG IS NOT WATERPROOF—KEEP DRY.Before useRemove the connector cover.How to replace the fuseThe location of the fuse differ according tothe type of AC mains plug (figures A and B).Confirm the AC mains plug fitted and followthe instructions below.Illustrations may differ from actual AC mainsplug.1. Open the fuse cover with a screwdriver.2. Replace the fuse and close or attach thefuse cover.CAUTION!IF THE FITTED MOULDED PLUG ISUNSUITABLE FOR THE SOCKET OUTLETIN YOUR HOME THEN THE FUSESHOULD BE REMOVED AND THE PLUGCUT OFF AND DISPOSED OF SAFELY.THERE IS A DANGER OF SEVEREELECTRICAL SHOCK IF THE CUT OFFPLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.