Panasonic SF4D Series Instruction Manual
Also see for SF4D Series: Quick instruction manualQuick instruction manualUser manualInstruction manualInstruction manual
    |
INSTRUCTION MANUALIO-Link Communication Unit for SF4D SeriesSFD-WL3CME-SFDWL3 No.0065-42VThank you very much for purchasing this Panasonic product.Please read this Instruction Manual carefully and thoroughly for the correct and opti-mum use of this product.Kindly keep this manual in a convenient place for quick reference.● This manual explains about the function of this product and its connection meth-od. Using its IO-Link communication function, the product allows confirmation ofthe settings of a light curtain (SF4D series) as a host. It can also store the settingdata of the connected light curtain.● For the detailed instructions for the light curtain to be connected to this product,visit our website (https://panasonic.net/id/pidsx/global).1 SAFETY PRECAUTIONS Always observe● This section explains important rules that must be observed to prevent humaninjury and property damage.• The hazards that may occur if the product is used incorrectly are described andclassified by level of harm.WARNING Risk of death or serious injuryCAUTION Risk of minor injury or property damage.● Use this device as per its specifications. Do not modify this device since its func-tions and capabilities may not be maintained and it may malfunction.● This device has been developed / produced for industrial use only.● This product is suitable for indoor use only.● Use of this device under the following conditions or environments is not presup-posed. Please consult us if there is no other choice but to use this device in suchan environment.1) Operating this device under conditions or environments not described in thismanual.2) Using this device in the following fields: nuclear power control, railroad, aircraft,auto mobiles, combustion facilities, medical systems, aerospace development,etc.● Note that this device may be damaged if it is subject to a strong shock (if it isdropped onto the floor, for example).● In case of disposal, dispose this device as an industrial waste.WARNING♦ Do not use the IO-Link data for safety control.♦ Machine designer, installer, employer and operator• The machine designer, installer, employer and operator are solely responsibleto ensure that all applicable legal requirements relating to the installation andthe use in any application are satisfied and all instructions for installation andmaintenance contained in the instruction manual are followed.• Whether this device functions as intended to and systems including this de-vice comply with safety regulations depends on the appropriateness of theapplication, installation, maintenance and operation. The machine designer,installer, employer and operator are solely responsible for these items.♦ Engineer• The engineer would be a person who is appropriately educated, has wide-spread knowledge and experience, and can solve various problems whichmay arise during work, such as a machine designer, installer or employer etc.♦ Operator• The operator should read this instruction manual thoroughly, understand itscontents, and perform operations following the procedures described in thismanual for the correct operation of this device.• In case this device does not perform properly, the operator should report this tothe employer and stop the machine operation immediately. The machine mustnot be operated until correct performance of this device has been confirmed.♦ Environment• Do not use a mobile phone or a radio phone near this device.• Do not install this device in the following places.1) A location exposed to direct sunlight2) A location where condensation may form due to sudden changes of tem-perature3) A location where there are corrosive or combustible gases4) A location with significant dirt, metal powder, or salt5) A location where organic solvents such as benzene, paint thinner or alco-hol, or strong alkaline substances such as ammonia or caustic soda, maycome in contact with the device or are present in the air.6) A location with significant steam or dust, a location subject to vibration or shock,or a location where water droplets may come into contact with the device.7) A location near high-voltage lines, high-voltage equipment, power lines,power equipment, equipment with an amateur radio transmitter, or equip-ment that generates large switching surges (minimum 100mm)♦ Light curtain setting information copy function• Use the copy function only when replacing the light curtain. If you write to non-replacement parts, it may not operate safety function properly.• To prevent misoperations by third parties, always implement the followingcountermeasures.1) Design to restrict send command on the IO-Link side.2) Use the communication module SF4D-TM1 (option) and Configurator LightCurtain software to enable the protection function.• After copying the configuration to the light curtain after replacement, alwaysverify of the safety function. If you do not check the operation and use it withincorrect settings, risk of impaired death or serious injury.♦ Other matters• Never modify this device. Risk of impaired device functionality and death orserious injury.CAUTION● This product cannot be used to directly enter settings from the IO-Link masterunit to a light curtain using IO-Link communication.2 STANDARDS / REGULATIONS● This product complies with the standards / regulations below. |
Related manuals for Panasonic SF4D Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine