Panasonic SL-CT590 Operating Instructions Manual

Contents

4Skip playThe disc plays from the selected track through to thelast track, then play stops automatically.Preparation: Put unit in stop mode.1 Select the desired track.2Changing the sound qualityPress during play or stop mode.The setting switches in the sequence indicated beloweach time [EQ] is pressed.S-XBS>TRAIN>LIVE>Cancel (no indicator is shown)^ ------------------------------------------------}S-XBS:Select this setting to boost the low-range response.TRAIN:Select this setting to avoid annoying other passengerswith noise from your headphones/earphones while rid-ing on the train, or to reduce fatigue when listening for along period of time.LIVE:Select this setting for a live concert effect.Note!The setting is returns to S-XBS when you disconnectthe power source.Other Play MethodsThe letters such as A in the illustrations refer to the descriptions in the “Location of Controls” section.Repeat play/Random playPress during play or stop mode.The setting is switched in the sequence indicated beloweach time [MODE] is pressed.1-track repeat (1 `)( ----------------]One track is repeated. |v |All-track repeat (`) |All the tracks on the disc are repeated. |v |Random (RANDOM) |The tracks play once each in random |order and then play stops. |v |Random repeat (RANDOM `) |The tracks play repeatedly in random |order. |v |Cancel (no indicator is shown) --------------}When pressed during program playThe setting is switched in the sequence indicated beloweach time [MODE] is pressed.1-track repeat (1 ` M)(------------]One track is repeated. |v |Memory repeat (` M) |The programmed tracks are repeated. |v |Cancel (M) -------------------------------------------}Note!≥You can select the first track to play in random playand random repeat play by pressing [9] while thedisc is stopped. All the tracks are played.≥You cannot select random play or random repeat playduring program play.≥The resume function does not work when random orrandom repeat are on.≥The mode is canceled when you disconnect the powersource.EFLocation of ControlsOPENOPENVOLUMEOPENOPENHOPENVOLUMEMEMORYMODEEQCFGEDBAHOLDVOLUME MEMORYI JK LHOLDMODEEQMNB EQBack panel of the unitC MODEA Open switch (OPEN)B EQ button (EQ)C Mode button (MODE)D DisplayE Skip/search buttons (:, 9)F Play/pause button (1/;)G Stop/operation off button (∫)H Rechargeable battery coverI Headphone jack (Ë)J Memory/recall button (MEMORY)K Headphone volume control buttons (j, i, VOLUME)L Hold switch (HOLD)M DC IN jack (KDC IN 4.5 V )N Battery case terminals (EXT BATT)Program playUp to 24 tracks can be entered in the program.Preparation: Put unit in stop mode.1 Select the desired track.2 Register in sequence.(The indication “M” and the programmed se-quence appear on the display.)3 Repeat steps 1 and 2 to program allthe desired tracks.4∫ To program the same track in the se-quence more than onceAfter step 2, press [MEMORY] desired number of times.∫ If “'” is displayedNo more tracks can be programmed.∫ To confirm the contents of the programPress [MEMORY] while the disc is playing. (The num-bers of the programmed tracks appear on the display insequence.)∫ To delete the entire programPress [∫].Note!The repeat and random play modes are canceled aftersteps 1 and 2.EMEMORYJFSide panel of the unit