Panasonic SL-SX320 Operating Instructions Manual

Also see for SL-SX320: Operating instructions Operating instructions Operating instructions

Contents

Dear CustomerThank you for purchasing this product. Before connecting, operating oradjusting this product, please read these instructions completely. Pleasesave this manual.PYVOLMEMORYMODEEQP PCBefore requesting service, make the below checks. If you are in doubt about some of the checkpoints, or if the remedies indicated in the chart do not solve the problem:In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mailconsumerproducts@panasonic.com, or web site (http://www.panasonic.com).In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505, web site(www.panasonic.ca), or an authorized Servicentre close to you.Troubleshooting guide1The model number and serialnumber of this product can befound on either the back or thebottom of the unit.Please note them in the spaceprovided below and keep forfuture reference.MODEL NUMBERSERIAL NUMBERThis manual was printed with soy based ink.Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.caC 2002 Matsushita Electric Industrial Co., Ltd.Printed in ChinaRQT6789-PF1102KN0Panasonic Consumer Electronics Company,Division of Matsushita Electric Corporation of AmericaOne Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.comPanasonic Sales Company,Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985pPortable CD playerOperating InstructionsModel No.SL-SX320SL-SX321C1. Damage requiring service—The unit should be serviced by qualified servicepersonnel if:1. (a) The AC power supply cord or AC adaptor has been damaged; or1. (b) Objects or liquids have gotten into the unit; or1. (c) The unit has been exposed to rain; or1. (d) The unit does not operate normally or exhibits a marked change inperformance; or1. (e) The unit has been dropped or the cabinet damaged.2. Servicing—Do not attempt to service the unit beyond that described in theseoperating instructions. Refer all other servicing to authorized servicing personnel.3. Replacement parts— When parts need replacing ensure the servicer uses partsspecified by the manufacturer or parts that have the same characteristics as the originalparts. Unauthorized substitutes may result in fire, electric shock, or other hazards.4. Safety check—After repairs or service, ask the servicer to perform safetychecks to confirm that the unit is in proper working condition.Product informationFor product information or assistance with product operation:In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, ore-mail consumerproducts@panasonic.com, or web site (http://www.panasonic.com).In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505,web site (www.panasonic.ca), or an authorized Servicentre close to you.Product serviceDATE OF PURCHASEDEALER NAMEDEALER ADDRESSTELEPHONE NUMBERUser memo:HOLDThis function causes the unit to ignore accidental button presses.Set to HOLD so the unit doesn’t power on accidentally or play is interrupted.Note on CD-R and CD-RWThis unit can play CD-DA format audio CD-R and CD-RW that have beenfinalized§ upon completion of recording. It may not be able to play someCD-R or CD-RW due to the condition of the recording.§Finalizing is a process that enables CD-R/CD-RW players to play audioCD-R and CD-RW.Resume functionThe player stores the track where you stopped play or power was cut off.Opening the lid when the unit is in stop mode cancels the function.Auto power off functionIf the unit is left in stop mode for approximately 10 minutes, the unit powersitself off automatically.≥The HOLD function is on (➪above).≥The disc isn’t correctly set.≥The disc is scratched or dirty. (Tracks skipped.)≥There is moisture on the lens. Wait for about an hour andthen try again.≥The lens is dirty: clean it with a blower (recommendedproduct: SZZP1038C).If the lens gets marked withfingerprints, gently wipe them off with a cotton swab.No play.≥Ensure the plugs are inserted firmly.≥Wipe the plugs clean with a clean cloth.≥The elapsed playing time disappears and sound is interruptedif bumps continue repeatedly.≥Separate this unit from mobile telephones.≥This doesn’t work if you open the lid while the unit is in stop mode.≥This doesn’t work during random play.≥It may not work correctly under some conditions.No sound or there is alot of noise.Play doesn’t resumefrom the track whereplay stopped at.≥Random play modes may be on (➪page 4).≥Play resumes from the track where you last stopped play or powerwas cut off (play may start from a different track if you change discsafter power is cut off). Use skip to return to the first track.The unit stopsworking.Disconnect then reconnect all power sources (batteries and ACadaptor).The battery indicatorfails to appear or isincorrect.≥The indicator does not appear when an AC adaptor is connected.≥The indicator does not appear correctly under some conditions.Play doesn’t startfrom the first track.( The HOLD function is on (➪above).) ≥You haven’t inserted a disc or it isn’t inserted correctly.≥You have inserted a disc this unit cannot play.* The disc lid is open.' Full: The program already contains 20 tracks.Display

/ 4

Related manuals for Panasonic SL-SX320