Panasonic SV-AV50 Operating Instructions Manual

Contents

40Recording Pictures suppliedfrom an external device1 Turn the SD Video Camera off and put inthe USB Cradle. (l 10)2 Connect the [AV IN/OUT] terminal of theUSB Cradle to the AV Output Sockets of theexternal device 2 using supplied AV Cable1.3 Turn on the SD Video Camera and set theRecord/Play mode Switch to [ ] andthen, set the operation mode to[PICTURE] or [MPEG4].4 Press the [MENU] Button and then, select[Setup] and press the Jog Ball.5 Set [Input select] to [Line] and press the[MENU] Button.≥The [ ] indication appears.6 Select desired image quality. (l 22, 24)7 Press the [MENU] Button.8 Set up the external device.≥Confirm that the image or sound signal is inputinto the SD Video Camera.≥In the [MPEG4] mode, when rotating the ZoomLever to [W], you can mute the sound from thespeaker. (The volume of the sound cannot bechanged. You can output the sound again whenrotating the Zoom Lever to [T].)9 Press the Recording Start/Stop Button.≥Recording starts.≥When the moving picture is being recorded,press the Recording Start/Stop Button again tostop recording.≥While this camera can record audio from an externaldevice, the audio connection should only beconnected to the “line” output of the external device.This is normally an “RCA” type of connector. Do notattempt to connect audio directly from thespeaker output of any device. Doing so will causeserious damage to this device.37567256721HH1HH.KPG.KPGȕǩȸȞȃȈ$GGR$GGR+PRWVUGNGEV+PRWVUGNGEVų#WVQRQYGTQP#WVQRQYGTQP 1HH1HHMENUMENU5,6 Ô×94 MENUMENUMODEMODEMENUMENUÔ×DC IN 4.8VAV IN/OUT212