Panasonic SV-AV50S Operating Instructions Manual

Also see for SV-AV50: Operating instructions

Contents

5Caution for AC mains lead (For UK only)Message to User who has Power Cable as an accessory. (l 7)For your safety, please read the following text carefully.This appliance is supplied with a mouldedthree-pin mains plug for your safety andconvenience. A 5-ampere fuse is fitted inthis plug.Should the fuse need to be replaced,please ensure that the replacement fusehas a rating of 5-amperes and it isapproved by ASTA or BSI to BS1362.Check for the ASTA mark Ï or the BSImark Ì on the body of the fuse.If the plug contains a removable fusecover you must ensure that it is refittedwhen the fuse is replaced. If you lose thefuse cover, the plug must not be used untila replacement cover is obtained. Areplacement fuse cover can be purchasedfrom your local Panasonic Dealer.IF THE FITTED MOULDED PLUG ISUNSUITABLE FOR THE SOCKETOUTLET IN YOUR HOME THEN THEFUSE SHOULD BE REMOVED AND THEPLUG CUT OFF AND DISPOSED OFSAFELY.THERE IS A DANGER OF SEVEREELECTRICAL SHOCK IF THE CUT OFFPLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.If a new plug is to be fitted, pleaseobserve the wiring code as shown below.If in any doubt, please consult a qualifiedelectrician.ª IMPORTANTThe wires in this mains lead are colouredin accordance with the following code:Blue: NeutralBrown: LiveAs the colours of the wires in the mainslead of this appliance may not correspondwith the coloured markings identifying theterminals in your plug, proceed as follows:The wire which is coloured BLUE must beconnected to the terminal in the plugwhich is marked with the letter N orcoloured BLACK.The wire which is coloured BROWN mustbe connected to the terminal in the plugwhich is marked with the letter L orcoloured RED.Under no circumstances should either ofthese wires be connected to the earthterminal of the three-pin plug, marked withthe letter E or the Earth Symbol Ó.ª Before UseRemove the Connector Cover as follows.ª How to replace the Fuse1 Remove the Fuse Cover with ascrewdriver.2 Replace the fuse and attach the FuseCover.ConnectorCoverFuseCoverFuse