Panasonic SV-MP010 Operating Instructions Manual

16Recording music on the unitThe first 256 characters of the filename created on the computer are displayed onthis unit.• This unit supports alphanumerics. It may not be able to display characters otherthan alphanumerics properly.• Supports MP3 ID3 V1 tags, ID3 V2.3 tags and WMA tags.• If there are no ID3 tags, the display shows the “filename.mp3”.• The ID3 tags recorded for the MP3 will not be displayed properly if they are in alanguage other than English.• Compatible with DRM (PDDRM ® and WMDRM10 ®, Microsoft®).• MP3/WMA files should always be saved in the MEDIA folder. If saved in the rootfolder, the files cannot be played back or deleted from the unit.• The saved tracks can be moved to subfolders in the MEDIA folder only on thecomputer.• The subfolders in the MEDIA folder are treated as playlists by the unit.( page 17, Files and folders structure display on your computer)• This unit can support the Windows Media Player (Version 10) sync downloadfunction.• The unit is PlaysForSure certified to support subscription based music downloadservices.RQTT085516NoteDisconnecting the unit■ When the unit is indicated as “Removable Disk” (MSC mode)Right-click the “Safely Remove Hardware” icon on the computer’staskbar.The “USB Mass Storage Device”window appears on the computerscreen. Follow the on-screen instructions to disconnect the USB cable.Depending on the OS, the display differs.■ When the unit is indicated as “Panasonic Audio Player”(MTP mode)Upon completion of the recording, check that “ACCESS” is not shownon the unit’s display, and then disconnect the USB cable.• When the USB cable is disconnected, the playback of the trackrecorded first will start after “WAIT...” has appeared on the display.• If the above procedure is not followed, the music data may bedestroyed, making it impossible to play the data properly. Use the unitor the computer to delete the music data which has been destroyed. Ifthe data cannot be deleted, initiate resetting ( page 31).Once resetting has been initiated, all the stored data will be lost. Re-record the music data on the unit.