Panasonic SV-PT1EB Operating Instructions Manual

Contents

For Your Information53Warning and Instruction DisplaysInsert a card.There is no data on the card or in the folder.An error has occurred during HDD/PC Cardinitialisation. Turn power off, then reinsert thecard. If error is repeated, format the card (p. 25)and reinsert it. If error persists, card may bedamaged.An error occurred during formatting of the card. Re-insert the card and then reformat it. (pp. 24, 25)There are no JPEG or TIFF files in the folder thatcan be displayed.Insufficient free space on the copy destination disk.Delete unnecessary files, or insert a card withsufficient free space.Secure data files (audio files that include copyrightrestrictions) cannot be copied.Indications ConditionTV Mode (TV Screen Display)Connect the AC adaptor.Selection cannot be changed between a PC CardHDD/PC Card and an SD Memory Card duringdata transfer between the unit and a PC. Wait fortransfer to finish, then make your selection.Insert the battery.Data transmission was interrupted. Disconnect theUSB cable. Check that the battery and AC adaptorare connected correctly, then reconnect the USBcable.The mode is being changed. Please wait a moment.After processing is finished, the power will turn off.The HDD SAFETY Detection Switch has activatedand the HDD has stopped for protection. Place theunit on a flat, level surface.Indications ConditionPC Mode (Liquid Crystal Display)CONNECT ACCANNOTCHANGE SLOTINSERT BATT.DISCONNECT USBPULL OUT USB CABLEMODE CHANGEPLEASE WAITPOWER OFFPLEASE WAITSAFETY MODEPUT IT DOWNNO CARDNO DATAINITIALIZE ERRORFORMAT ERRORNO IMAGE FILENO CAPACITYCOPIED EXCEPTSECURE FILES(Continued on next page.)Eng.p52-56.p65 2003/02/13, 16:4853