There are 100 rhythms stored in the memory of this instrument. An additional VARIATION patterns for each rhythm isavailable.Rhythm1. Press the RHYTHM button. Use the number buttonsto select a rhythm number (three digits).• The list of RHYTHMS is shown near the left end ofthe panel.• The rhythm number and name are shown on the dis-play.• Enter three digits to specify the rhythm. For example,for rhythm number 003, press 0, 0, 3. For rhythmnumber 030, press 0, 3, 0.• The + and – buttons can be used to increase ordecrease the number. When a button is pressed andheld, the numbers change quickly.• To cancel a number you are entering, press the + and– buttons at the same time (CANCEL).2. Press the START/STOP button.• The selected rhythm pattern begins to play.• You can stop the rhythm by pressing the START/STOPbutton again to turn it off.• Since there is no DRUM part for the 091 CLASSICBALLAD rhythm, the pattern does not sound unlessthe AUTO PLAY CHORD is used.VARIATIONWhen you press the VARIATION button, the rhythmchanges to the variation pattern for the selected rhythm.• “VARI” is shown on the display when the variationpattern is selected.• During a rhythm performance, you can switch betweenthe normal pattern and the variation pattern bypressing the VARIATION button.• There is no VARIATION pattern for the METRONOMErhythm.MENUVARIATIONSOUNDRHYTHM0 1 2 3+ 4 5 6— 7 8 9CANCELGENERALRHYTHMSTART/STOPPLAY/PAUSEVARIATIONRHYTHMGENERALRHYTHM VARIPart II Playing the rhythm25QQTG0588