ENGLISH613Electrical ConnectionsENGLISH512TroubleshootingTroubleshooting Tips❐ Sirius ControlDisplay Cause/StepNote:≥ For details, refer to the operating instructions for the Sirius receiver used.User’s registration has not been carried out.➡Complete user’s registration.Your location is out of receivable areas (e.g. in a tunnel), or the unit isdecoding a selected broadcast. The display appears also while the con-nections are being checked after the power has been turned on.➡Wait until getting out of the unreceivable area or completing the de-coding.A channel that is not included in the agreement was selected.➡Select a channel that is included in the agreement. Refer to the op-erating instructions for Sirius receiver with regard to the agreement.The ID could not be acquired.➡Contact your nearest Panasonic Servicenter for service.≥ When the Sirius receiver fails to operate for some reason.≥ When ON serves as the Sirius setting and the Sirius receiver has notbeen connected.➡Check the Sirius receiver’s connections.The selected channel is invalid.➡Select a channel which can be received instead.Example combination≥ Sirius receiver (CR-SRT100, option)≥ CD changer (CX-DP880U, option)≥ Dual changer control unit(CA-CD55, option)Note:≥ For wiring, carefully read the op-erating instructions for the de-vices connected.Ground leadTWIN CD .C-CONT6CD changer(CX-DP880U, option)Power connectorChanger 2connectingcordCD changerinput CordDIN extension cord(Supplied with CA-CD55)(Brown/white Stripe)Dual CD changer control leadL (white)R (red)L (white)R (red)RCA Cord(Supplied with CA-CD55)Dual ChangerOutput CordChanger 1connectingcordDIN cordRCA cordBattery LeadDual changercontrol unit(CA-CD55, option)CD.C-INDIN CordSirius receiver(CR-SRT100, option)RCA Cord(option)