Watching TVCable / Satellite / Fiber Optic boxInitial setting● Depending on the model, it may be necessary to remove the terminalcover / cable cover before connecting or disconnecting cables.1. ConnectingSelect the wiring method connecting your box to the TV, AV IN orAntenna/Cable in.● HDMI will provide the best HD picture2. Change INPUTINPUTPress the INPUT button to select the proper connection. Wait for 2seconds.● The menu choices vary depending on which input is selected.3. Power on your Cable, Satellite or Fiber Optic boxUse the box’s remote control to change channels.● If the box is connected to the TV using a COAX cable (Antenna/Cablein), then set the TV channel to CH3 or CH4. Note that the picture willnot be in HD.● CC/SAP is not available when watching TV with a Cable or Satellitebox connected via HDMI.● If you have a High Definition box, ensure that it is outputting 720p or1080i signal.Tip: press the TV’s INFO button to verify.● Check your box’s “aspect” or “format” settings. It should be set to 16:9,Widescreen or Full.● If the audio volume is too low, check the box’s audio settings.● Contact your Cable or Satellite provider for instructions of any boxsettings.- 27 -