Panasonic TC-L32C22 Quick Setup Guide (English, Spanish) Operating Instructions Manual

Also see for Spanish): Installation and operating insctructions Installation and operating instructions Operating instructions Installation and operating instructions Installation and operating instructions

Panasonic TC-L32C22 Quick Setup Guide (English, Spanish) Operating Instructions Manual Manual pdf 25 page image

25AdvancedHow to Use Menu Functions(picture, sound quality, etc.)(Continued)Menu listMenu Item Adjustments/Configurations (alternatives)SetupChannel surf modeSets the mode to select the channel with the Channel up/down button.(All/Favorite/Digital only/Analog only)• Favorite: Only channels registered as FAVORITE. (p. 16)Language Selects the screen menu language.Clock Adjusts the clock. (p. 14)ANT/Cable setup Sets channels. (p. 13)Input labels Selects the terminal and label of the external equipment. (p. 37)VIERA Link settingsVIERA LinkControls the equipment connected to HDMI terminals (Off/On) (p. 28)• “Power off link”, “Power on link”, “Energy saving mode”, “Unselected device energy save”and “Default speakers” cannot be selected if “Off” is set.Power on link Sets “Power on link” of the HDMI connected equipment (No/Yes) (p. 28)Power off link Sets “Power off link” of the HDMI connected equipment (No/Yes) (p. 28)Energy savingmode Sets “Energy saving mode” of the HDMI connected equipment. (Quick start/Save) (p. 28)Unselecteddevice energysaveSets “Unselected device energy save” of the HDMI connected equipment. (p. 28)(No (stay on)/Yes (with prompt)/Yes (no prompt))Default speakers Selects the default speakers (TV/Theater) (p. 28)ECO/energy savingPower save Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a darkroom. (Standard/Saving)No signal for 10minutesTo conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATIONcontinue for more than 10 minutes. (Stay on/Power TV off)Note• Not in use when “Auto power on”, “On/Off Timer” or “Lock” is set, or while “SD mode” or“Digital Channel” is selected.• “No signal for 10 minutes was activated” will be displayed for about 10 seconds whenthe TV is turned on for the first time after the power was turned off by “No signal for 10minutes”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutesprior to the shut-off.No activity for 3hoursTo conserve energy, the TV automatically turns off when no operation of remote and sidepanel key continues for more than 3 hours. (Stay on/Power TV off)Note• Not in use when “Auto power on” or “On/Off Timer” is set, or while “PC input” is selected.• “No activity for 3 hours was activated” will be displayed for about 10 seconds when the TVis turned on for the first time after the power was turned off by “No activity for 3 hours”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutesprior to the shut-off.AdvancedsetupAuto power onTurns TV On automatically when the cable box or a connected device is turned On (No/Yes)TV AC cord must be plugged into this device. TV comes on every time the power is restored.• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set.(p. 38)Image viewerauto playSet “Thumbnail” or “Slideshow” to play back SD cards automatically.(Slideshow/Thumbnail/Set later/Off)First time setup Restart first time setup from “Language” setting. (p. 12)About Displays TV version and software license.Reset to defaults Performing Reset will clear all items set with Setup, such as channel settings.Sub menu listMenu Item Adjustments/Configurations (alternatives)SetupSUB MENUChannel surf mode Sets the mode to select the channel with Channel up/down button.(All/Favorite/Digital only/Analog only)Set favorite Sets favorite channels. (p. 16)Edit CH caption Changes the station identifier. (p. 35)Signal meter Checks the signal strength if interference or freezing occurs on a digital image.