9Getting startedAttaching the pedestal to TV■Assembling the pedestalFix securely with assembly screws A (Total 4 screws).Tighten screws firmly.ALRPoleFrontPoleBase■Set-upTighten assembly screws B (total 4 screws) loosely at first,then tighten them firmly to fix securely.BFix securely with assemblyscrews B (Total 4 screws).Rear sideArrowmarkPoleHole for pedestalinstallationPoleBaseBottom viewWork on a flat surfaceRemoving the pedestal from the TVBe sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.Remove the assembly screws B from the TV.Lift the TV from the pedestal.Remove the assembly screws A from the pole.WarningDo not disassemble or modify the pedestal.Otherwise, the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than that provided with this TV.Otherwise, the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal when it is physically damaged, personal injury may result. Contact yournearest Panasonic Dealer immediately.During set-up, make sure that all screws are securely tightened.If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestalwill not be strong enough to support the TV, and it might fall over and become damaged, and personalinjury may result.When removing the pedestal, do not remove the pedestal by any methods other than the specifiedprocedure. (above)Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.Accessories/Optional AccessoryAccessoriesAssembly screws(4 of each)Asize (M5 × 18)Bsize (M5 × 30)Poles (2)L RL or R is printed at thebottom of the poles.Base (1)