Panasonic TC-P54Z1 Quick Start Manual

Also see for Viera TC-P54Z1: Specifications Operating instructions Service manual Technical guide Quick start guide

Panasonic TC-P54Z1 Quick Start Manual Manual pdf 5 page image

5AC Power Supply CordTo prevent fire or electric shock:The Plasma TV is designed to operate on a 120 V AC,60 Hz service. Insert the power cord plug as far as it willgo into the wall socket.If the plug is not fully inserted, heat may generate, whichcould cause a fire.Do not handle the power cord plug with wet hands.Do not do anything that might damage the power supplycord.When disconnecting the power supply cord, hold theplug, not the cord.Handling the power supply cordInsert the power plug fully into the socket outlet. (If thepower plug is loose, it could generate heat and cause fire.)Ensure that the power plug is easily accessible.Ensure the earth pin on the power plug is securelyconnected to prevent electrical shock.• An apparatus with CLASS I construction shall be connected toa power socket outlet with a protective earthing connection.Do not touch the power plug with a wet hand. (This maycause electrical shock.)Do not use any power cord other than that provided withthis TV. (This may cause fire or electrical shock.)Do not damage the power cord. (A damaged cord maycause fire or electrical shock.)• Do not move the TV with the cord plugged in the socket outlet.• Do not place a heavy object on the cord or place the cordnear a high-temperature object.• Do not twist the cord, bend it excessively, or stretch it.• Do not pull on the cord. Hold onto the power plug bodywhen disconnecting cord.• Do not use a damaged power plug or socket outlet.Radio wavesDo not place this TV in any medical institutions orlocations with medical devices.Radio waves from this TV may interfere with the medicaldevices and cause accidents due to the malfunction.Do not use this TV near any automatic control devicessuch as automatic doors or fire alarms.Radio waves from this TV may interfere with the automaticcontrol devices and cause accidents due to the malfunction.Keep the RF remote control, Tuner Box and Wireless Unitaway at least 8.7 inches (22 cm) from the location wherea cardiac pacemaker is implanted.Radio waves from this TV may interfere with the operation ofthe pacemaker.Do not disassemble the RF remote control, Tuner Box orWireless Unit.It may cause troubles such as difficulties in communication.If Problems Occur During UseIf a problem occurs (such as no picture or no sound),or if smoke or an abnormal odor is detected from thePlasma TV, unplug the power supply cord immediately.Continued use of the TV under these conditions might causea fire or permanent damage to the TV. Have the TV evaluatedby an Authorized Service Center. Servicing of the TV byunauthorized personnel is strongly discouraged due to itshigh voltage.If water or an object gets inside the Plasma TV, if thePlasma TV is dropped, or if the enclosure becomesdamaged, unplug the power supply cord immediately.A short-circuit may occur, which could cause a fire. Contactan Authorized Service Center for an evaluation.CAUTIONDo not cover the ventilation holes.Doing so may cause the Plasma TV to overheat, which cancause a fire or damage to the Plasma TV.Leave a space of 3 15/16” (10 cm) or more at the top, leftand right, and 2 3/4” (7 cm) or more at the rear.When using the pedestal, keep the space between thebottom of the TV and the pedestal or stand surface clearfrom objects that may obstruct ventilation.When Moving the Plasma TVBe sure to disconnect all cables before moving thePlasma TV.Moving the TV with its cables attached might damage thecables which, in turn, can cause fire or electric shockTo prevent an electric shock, disconnect the powerplug from the wall outlet as a safety precaution beforecarrying out any cleaning.Transport only in upright positionTransporting the unit with its display panel facing upright ordownward may cause damage to the internal circuitry.Using a dry cloth, clean any dust from the power supplycord and plug regularly.Build-up of dust on the power cord plug can increasehumidity, which might damage the insulation and cause a fire.This Plasma TV radiates infrared rays;therefore, it may affect other infrared communicationequipment. Install your infrared sensor in a place away fromdirect or reflected light from your Plasma TV.The TV will still consume some power as long as the powersupply cord is connected to the wall outlet.Display panel is made of glass. Do not apply strong forceor impact to the display panel.This may cause damage resulting in injury.The TV is heavy. TV should be handled by 2 or morepeople. Support as shown to avoid injury by the TVtipping or falling.When the Wireless Unit (Receiver) is attached, do not hold it.