Off timer 90231PC4:315Basic ControlsStandby (ON / OFF) buttonThe Plasma Display must first be plugged intothe wall outlet and turned on at the power switch(see page 12).Press ON to turn the Plasma Display On, fromStandby mode. Press OFF to turn the PlasmaDisplay Off to Standby mode.SET UP button (see page 16, 17)SOUND button (see page 25)DIRECT INPUT buttonsPress the INPUT “1”, “2”, “3” or “PC”input mode selection button to selectthe INPUT mode. (see page 13)This button is used to switch directlyto INPUT mode.Channel AdjustmentThis button cannot be used for thismodel.Volume AdjustmentPress the Volume Up “+” or Down“–” button to increase or decreasethe sound volume level.OFF TIMER buttonThe Plasma Display can be presetto switch to stand-by after a fixedperiod. The setting changes to 30minutes, 60 minutes, 90 minutesand 0 minutes (off timer cancelled)each time the button is pressed.30 60090When three minutes remain, “OFFTIMER 3” will flash.The off timer is cancelled if a powerinterruption occurs.Status buttonPress the “Status” button to displaythe current system status.1 Input label2 Aspect mode (see page 18)3 Off timerThe off timer indicator is displayed onlywhen the off timer has been set.R button (see page 17)Press the R button to return to previous menu screen.POSITION buttonsACTION buttonPress to make selections.POS. /SIZE button(see page 19)PICTURE button(see page 23)INPUT button(INPUT1, INPUT2, INPUT3 andPC selection)Press to select INPUT1, INPUT2,INPUT3 and PC input SLOTSsequentially. (see page 13)Sound mute On / Off(see page 26)Numeric buttons(see page 36)ASPECT buttonPress to adjust the aspect.(see page 18)MULTI Window buttons(see page 21)SURROUND button(see page 26)The surround setting switches onand off each time the SURROUNDbutton is pressed.The benefits of surround sound areenormous. You can be completelyenveloped in sound; just as if youwere at a concert hall or cinema.Digital Zoom (see page 27)Remote ID lock (see page 36)N button(see page 19, 20, 23, 24, 25)Remote Control Transmitter