Panasonic TH-32D400A Operating Instructions Manual

Also see for TH-32D400A: Operating instructions

Contents

Connecting the TV | Initial Setup8Speaker systemHDMI cableAmplifier withspeaker systemTV●Use HDMI 2 for connecting an amplifier that has ARC(Audio Return Channel) function.For an amplifier without ARC function, use DIGITALAUDIO OUT.●To enjoy the sound from the external equipment inmulti-channel sound (e.g. Dolby Digital 5.1ch), connectthe equipment to the amplifier. For the connections,read the manuals of the equipment and amplifier.Initial SetupWhen you first turn on the TV, a series of steps will pop-up to guide you to setup your TV.●These steps are not necessary if the setup has beencompleted by your local dealer.1 Plug the mains plug into the socketoutlet and turn on the TV.It may take a few seconds before the screen isdisplayed.AC 220 - 240 V,50/60 HzProceed to steps 2, 3 and 4.Scanning starts automatically whenyou turn on the TV (step 3). After scanning iscompleted, proceed to step 4.2 Select your area.New South Wales/Australian Capital TerritoryVictoriaQueenslandSouth AustraliaWestern AustraliaNorthern TerritoryTasmaniaSelect State/TerritoryOKAccessSelect3 Scanning starts.[Automatic Channel Search][Auto Tuning]Example:Automatic Channel SearchStatus: Scanning...Analogue : 0Digital : 1EXITRETURNScan 5%●This function searches and stores TV channels.●The stored channels and sorted channel order varydepending on the area, broadcasting system andconditions of signal reception.4 Select [Home].Please select your viewing environment.Home ShopOKConfirmChange●[Shop] is for shop display.●To change the viewing environment later on, youneed to initialise all settings by accessing [ShippingCondition] (p. 16).Setup is now complete and your TV is ready forviewing.Note●If tuning has failed, check the connection of the RFcable, then follow the on-screen instructions.