Panasonic TH-37PA20 Operating Instructions Manual

Also see for Viera TH-37PA20: Operating instructions Operating instructions Operating instructions Manual de instrucciones Operating instructions

71 2 34 5 67 8 90Supplied AccessoriesSlide off the battery cover Insert batteries - note correctpolarity (+ and -)Replace the coverFitting remote control batteries1 2 3Two “R6 (UM3)” sizeInstalling the ferrite core (Small size)Pull back the tabs(in two places)OpenPress the cablethrough and close1 2 3Installing the ferrite core (Large size)Pull back the tabs(in two places)OpenPress the cablethrough and close1 2 3The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause thebatteries to burst.Observe the following precaution:1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.2. Do not combine a used battery with a new one.3. Do not mix battery types (example:“Zinc Carbon” with “Alkaline”).4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.5. Battery replacement is necessary when remote control acts sporadically or stops operating the TV set.Battery cautionsDo not use rechargeable (Ni-Cd) batteries.They are different in shape and performance and may fail to ensure correct operation.• Operating Instruction book • Remote Control Transmitter(EUR511281) • AC cord• Batteries for the RemoteControl Transmitter(2 × R6 (UM3) size)Check the accessories before installations.• Ferrite core(small size) × 5 • Ferrite core(large size) × 3