Panasonic TH-37PG9U Operating Instructions Manual

Also see for TH-37PG9U: Operating instructions Service manual Manual de instrucciones

Contents

21Advanced PIP1235Press to display the Setup menu.Press to select “OSD Language”.Press and hold until the Options menu is displayed.Press to select Advanced PIP.Press to adjust the menu.Off : Sets normal two screen display mode(see page 20).On : Sets Advanced PIP mode.Press to confirm.Press to exit fromOptions menu.46Notes:• Advanced PIP corresponding signalOne screen Advanced PIPMain screenSub screen• Sound output is from the picture which is selected in Audio OUT (PIP) (See page 24).• In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of thepictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayedon the main picture and depending on the 2-picture display mode.• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.• Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on themsatisfactorily.• Following combinations of two analog signals cannot be displayed simultaneously.Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)• Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.1/3OptionsOff-timer functionINPUT lockStudio W/BAdvanced PIPDisplay sizeInitial VOL levelMaximum VOL levelInitial INPUTOnscreen displayOffOffOffOffEnableOnOff0OffOff0Sub screen Main screenNTSC, PAL, SECAM (tuner, video)525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i,1125/50i, 1250/50i (Component Video, RGB, DVI, SDI,HDMI)640x480@60Hz, 852x480@60Hz, 1024x768@60Hz,1366x768@60Hz (RGB, DVI, HDMI)1280x768@60Hz (DVI)