Panasonic TH-37PH10UK Operating Instructions Manual

Also see for TH-37PH10UK: Operating instructions manual Manual de instrucciones Operating instructions Service manual

Contents

15OFF TIMER 90123PCNORMAL30 60090Basic ControlsStandby (ON / OFF) buttonThe Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 13).Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Offto Standby mode.SET UP button (see page 16, 17)DIRECT INPUT buttonsPress the INPUT “1”, “2”, “3” or “PC” input mode selection button toselect the INPUT mode.This button is used to switch directly to INPUT mode.These buttons can only display the slot which is installed. If you press the buttonwhose slot is not installed, it automatically displays the current input signal.Notes:• For TH-37PH10UK, press to switch the input mode betweenINPUT1A and INPUT1B. The input mode is not switched to INPUT3even if pressing .• For TH-42PH10UK, TH-50PH10UK and TH-58PH10UK, press toswitch the input mode between INPUT2A and INPUT2B.• Image retention (image lag) may occur on the plasma display panel whena still picture is kept on the panel for an extended period. The function thatdarkens the screen slightly is activated to prevent image retention (seepage 46), this function is not the perfect solution to image retention.Channel AdjustmentThis button cannot be used for this model.Volume AdjustmentPress the Volume Up “+” or Down “–” button to increase or decreasethe sound volume level.OFF TIMER buttonThe Plasma Display can be preset to switch to stand-by after a fixedperiod. The setting changes to 30 minutes, 60 minutes, 90 minutes and0 minutes (off timer cancelled) each time the button is pressed.When three minutes remain, “OFF TIMER 3” will flash.The off timer is cancelled if a power interruption occurs.Remote ID lock (see page 35)Digital Zoom (see page 26)Status buttonPress the “Status” button to display the current system status.Press to accessDigital Zoom.This displays an enlargement of the designated part of the displayed image.ACTION buttonPress to makeselections.SOUND button(see page 25)R button (see page 17)Press the R button to return to previous menu screen.POSITION buttons1 Input label2 Aspect mode (see page 19)3 Off timerThe off timer indicator isdisplayed only when the offtimer has been set.