Panasonic TH-37PR11UH Operating Instructions Manual

Also see for TH-37PR11UH: Operating instructions Instruction manual Service manual

Contents

1/2PCOFFSTANDBY SAVE OFFPOWER MANAGEMENT OFFAUTO POWER OFF OFFOSD LANGUAGE ENGLISH (US)COMPONENT/RGB-IN SELECTRGBINPUT LABELSIGNALSCREENSAVERPOWER SAVESET UP28Reduces power consumptionPress to select“POWER SAVE”“STANDBY SAVE”“POWER MANAGEMENT”“AUTO POWER OFF”.Press to select “ON” or “OFF”.On OffPress to exit from SET UP.• POWER SAVE: When this function is turned ON, luminous level of the Plasma Display is suppressed, sopower consumption is reduced.• STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced duringpower supply standby (see page 12, 14, 15), so standby power of the set is reduced.• POWER MANAGEMENT: When this function is set to ON, it operates under the following conditions to turn the poweron or off automatically.When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC INsignal input:→ Power is turned off (standby); the power indicator lights up orange.When pictures (HD/VD sync signals) are subsequently detected:→ Power is turned on; the power indicator lights up green.Notes:• This function operates only during PC IN signal input.• This function is invalid during input from PC Input Terminal Board (TY-42TM6P).• This function is effective when “SYNC” is set to “AUTO”, “COMPONENT / RGB-IN SELECT”is set to “RGB” and during normal viewing (one picture screen).• AUTO POWER OFF: Equipment power supply is turned OFF when there is no signal.When this is set to On, the power supply of the unit goes Off 10 minutes after the inputsignals stop.Notes:• This function operates only during PC IN signal input.• This function is effective when “SYNC” is set to “AUTO”, “COMPONENT / RGB-IN SELECT”is set to “RGB” and during normal viewing (one picture screen).123