Panasonic TH-37PR11UK Operating Instructions Manual

Also see for TH-37PR11UH: Operating instructions Instruction manual Service manual

Contents

MENU ENTER/INPUT VOL1/2SIGNALPCOFFSTANDBY SAVE OFFPOWER MANAGEMENT OFFAUTO POWER OFF OFFOSD LANGUAGE ENGLISH (US)COMPONENT/RGB-IN SELECTRGBINPUT LABELPOWER SAVESET UPSCREENSAVER13Initial selectionsSelecting the On-Screen Menu LanguageSelecting the input signalPress to display the SET UP menu.Press to select OSD LANGUAGE.Press to select your preferred language.Selectable languagesSelect the input signals to be connected by installing the optional Terminal Boards.Press to select the input signal to be played back from theequipment which has been connected to the Plasma Display.Input signals will change as follows:Notes:• Selecting is also possible by pressing the INPUT button on the unit.• Input terminal will not be selected if the terminal board is not installed into the SLOT.• Select to match the signals from the source connected to the component/RGB inputterminals. (see page 30)• In 2 screen display, the same input mode cannot be selected for the main picture andsub picture.• Image retention (image lag) may occur on the plasma display panel when a still pictureis kept on the panel for an extended period. The function that darkens the screen slightlyis activated to prevent image retention (see page 40), but this function is not the perfectsolution to image retention........(Japanese).......(Chinese)ItalianoFrançaisDeutschEnglish(UK)EspañolENGLISH(US).......(Russian)РусскийSwing up the door at “PULL”.INPUT1 INPUT2 PCINPUT3