Panasonic TH-37PW5 Operating Instructions Manual

Also see for TH-42PW5: Service manual Service manual Service manual Operating instructions Operating instructions

5Safety PrecautionsWARNINGSetupThis Plasma Display is for use only with the following optional accessories. Use with any other type of optionalaccessories may cause instability which could result in the possibility of injury.(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)• Speakers ........................................ TY-SP37P4W-S, TY-SP37P5W-S (TH-37PW5)TY-SP42PM3W, TY-SP42P5W-S (TH-42PW5)• Pedestal .......................................... TY-ST05-S• Wall stand ....................................... TY-ST42PW1• Mobile stand ................................... TY-ST42PF3 (TH-42PW5)• Wall-hanging bracket (vertical) ....... TY-WK37PV3 (TH-37PW5), TY-WK42PV1 (TH-42PW5)• Wall-hanging bracket (angled) ....... TY-WK42PR1 (TH-42PW5)• Ceiling unit ..................................... TY-CE42PS1• Scart/Component Terminal Board ... TY-37TM5T (TH-37PW5), TY-42TM5T (TH-42PW5)• Receiver .......................................... TU-PT600E• Tuner Terminal Board ...................... TY-37TM5H (TH-37PW5), TY-42TM5H (TH-42PW5)• Connecting Cable ............................ TY-SCP15C03Always be sure to ask a qualified technician to carry out set-up.Do not place the Plasma Display on sloped or unstable surfaces.• The Plasma Display may fall off or tip over.Do not place any objects on top of the Plasma Display.• If water is spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could resultin fire or electric shock. If any foreign objects get inside the Plasma Display, please consult your local Panasonicdealer.If using the pedestal (optional accessory), leave a space of at least 10 cm at the top, left and right, at least 6 cmat the bottom, and at least 7 cm at the rear. If using some other setting-up method, leave a space of at least 10cm at the top, bottom, left and right, and at least 1.9 cm at the rear.Avoid installing this product near electronic equipment that is easy to receive electromagnetic waves.• It will cause interference in image, sound, etc. In particular, keep video equipment away from this product.When using the Plasma DisplayThe Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz.Do not cover the ventilation holes.• Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display.Do not stick any foreign objects into the Plasma Display.• Do not insert any metal or flammable objects into the ventilations holes or drop them onto the Plasma Display, asdoing so can cause fire or electric shock.Do not remove the cover or modify it in any way.• High voltages which can cause severe electric shocks are present inside the Plasma Display. For any inspection,adjustment and repair work, please contact your local Panasonic dealer.Securely insert the power cord plug as far as it will go.• If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wallsocket plate is loose, they shall not be used.Do not handle the power cord plug with wet hands.• Doing so may cause electric shocks.Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plugbody, not the cable.• Do not damage the cable, make any modifications to it, place heavy objects on top of it, heat it, place it near anyhot objects, twist it, bend it excessively or pull it. To do so may cause fire and electric shock. If the power cable isdamaged, have it repaired at your local Panasonic dealer.If the Plasma Display is not going to be used for any prolonged length of time, unplug the power cord plugfrom the wall outlet.