Panasonic TH-37PW7BX Operating Instructions Manual

Also see for TH-37PW7BX: Service manual Service manual Service manual

21DetailsAdjusts the dark shades of the image in gradiation.Adjustment of parts which are extremely bright and hard to see.(This cannot be adjusted when the input signal is DVI.)Adjusts the white balance for light red areas.Adjusts the white balance for light blue areas.Adjusts the white balance for dark red areas.Adjusts the white balance for dark blue areas.S Curve 2.0 2.2 2.5Increases the brightness of dark signal automatically.EffectPicture AdjustmentsItemContrastBrightnessColourTintSharpnessEffect AdjustmentsLess MoreDarker BrighterReddish GreenishSelects the proper brightness anddensity for the room.Adjusts for easier viewing of dark picturessuch as night scenes and black hair.Adjusts colour saturation.Adjust for nice skin colour.Adjusts picture sharpness.Notes:• “Colour” and “Tint” settings cannot beadjusted for “RGB/PC” and “DVI” inputsignal.• You can change the level of eachfunction (Contrast, Brightness, Colour,Tint, Sharpness) for each PictureMode.• The setting details for normal,dynamic and cinema respectively arememorized separately for each inputmode (INPUT1, INPUT2, INPUT3 andPC IN).• The “Tint” setting can be adjusted forN T S C s i g n a l o n l y d u r i n g “ AV(S Video)” input signal.• In Contrast, there is not a noticeablechange even when contrast isincreased with a bright picture orreduced with a dark picture.Less MoreLess MoreItemBlackextensionInput levelW/B High RW/B High BW/B Low RW/B Low BGammaAGCAdvanced settingsLess MoreLess MoreLess MoreLess MoreLess MoreDown UpNotes:• Carry out “W/B” adjustment as follows.1. Adjust the white balance of the bright sections using the “W/B High R” and “W/B High B” settings.2. Adjust the white balance of the dark sections using the “W/B Low R” and “W/B Low B” settings.3. Repeat steps 1 and 2 to adjust.Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.• The adjustment values are memorized separately for each input mode (INPUT1, INPUT2, INPUT3 and PC IN).• The adjustment range values should be used as an adjustment reference.Off OnLess MoreOn the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any timeor the ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( N/ Normalise Normalisation)